15.6.4 Module Quiz - IP Static Routing

Which two methods can be used to identify the next hop in a static route? (Choose two.)

• Destination interface

• Next hop IP address

• Destination network address

• Exit interface

• Source IP address

Which IPv4 static route statement is true?

• The destination network is identified using the network address and wildcard mask.

• The distance keyword is used to create a fully specified static route.

• The source network is identified using the network address and wildcard mask.

• Using the exit interface only is common in a point-to-point configuration.

How is the destination network in an IPv6 static route identified?

• Using an IPv6 prefix and prefix length

• Using an IPv6 prefix and subnet mask

• Using an IPv6 prefix and wildcard mask

• Using an IPv6 prefix only

A network administrator configures a router by the command ip route 0.0.0.0 0.0.0.0 209.165.200.226. What is the purpose of this command?

• To forward all packets to the device with IP address 209.165.200.226

• To add a dynamic route for the destination network 0.0.0.0 to the routing table

• To forward packets destined for the network 0.0.0.0 to the device with IP address 209.165.200.226

• To provide a route to forward packets for which there is no route in the routing table

Which type of static route that is configured on a router uses only the exit interface?

• Recursive static route

• Directly connected static route

• Fully specified static route

• Default static route

A network administrator uses the command ip route 172.18.0.0 255.255.0.0 S0/0/1 to configure a floating static route on a router. That route will function as a backup route to reach the EIGRP learned network 172.18.0.0/16. After this configuration, the EIGRP route is removed from the routing table even though EIGRP is still functioning properly. Why is the static route not functioning as intended?

• The next hop neighbor IP address is not configured.

• The administrative distance value is not high enough on the static route.

• The destination network is incorrectly configured.

• The network mask is incorrectly configured.

What type of static route is created when the next-hop IP address and exit interface are specified?

• Recursive static route

• Directly connected static route

• Fully specified static route

• Floating static route

What is the correct syntax of a floating static route?

• ip route 209.165.200.228 255.255.255.248 serial 0/0/0

• ip route 209.165.200.228 255.255.255.248 10.0.0.1 120

• ip route 0.0.0.0 0.0.0.0 serial 0/0/0

• ip route 172.16.0.0 255.248.0.0 10.0.0.1

Which static route statement shows a recursive IPv6 static route?

• Ipv6 route 0::/0 S0/0/0

• Ipv6 route 0::/0 S0/0/0 254

• Ipv6 route 2001:db8:cafe:1::/56 S0/0/0

• Ipv6 route 2001:db8:cafe:1::/56 2001:db8:1000:10::1

• Ipv6 route 2001:db8:cafe:1::/56 S0/0/0 2001:db8:1000:10::1

A network administrator is configuring a route to forward packets to a specific web server. What type of route should be configured by the administrator?

• A host route

• An OSPF route

• An EIGRP route

• A default route

• A static route with an administrative distance higher than 1