Autocare level 2 mock test part A- part 2

Which piece of equipment would be typically used to measure the gap between an inductive ABS sensor and reluctor ring?

• Micrometer

• 
  Voltmeter

• Non-magnetic feeler gauge

• 
  Steel feeler gauge

A benefit of keeping accurate customer records is it can help:

• to identify opportunities for offering additional products or services

• to advise the HR department about the training required for new staff

  
  

• supply accurate information to the data controller and government departments

• with the production of statistical information on competitor activities

When using chemicals for cleaning the work area:

• protective equipment/clothing does not need to be used

• 
  it does not matter if there is no COSHH sheet available

• 
  different liquids can be mixed to make a stronger solution

• 
  always read the instructions on the packaging prior to use

What tool is shown in the image?

• 
  Pointed nose pliers.

• Fuel clip removal pliers.

• External circlip pliers.

• Internal circlip pliers.

In the event of failure of a vehicle`s Anti-lock Braking System (ABS) in dry conditions with a good road surface, which one of the following will the driver MOST likely experience when applying the brakes hard?

• The vehicle will pull to the nearside

• 
  Locked wheels and increased stopping distances

• Reduced driver braking effort

• Vibration through the steering wheel

Which is the most suitable fire extinguisher to use on electrical equipment fires?

• Carbon Dioxide

• Foam

• Water

• Powder

On a rack and pinion steering system, it is important to adjust both track rod ends evenly during front wheel alignment adjustment to:

• make sure the camber angles remain constant

• 
  ensure true rolling motion is maintained when cornering

• 
  maintain the accuracy of the castor angle

• 
  ensure the vehicle thrust line remains within specification

On a pre-engaged starter motor, what action takes place first when the starter switch is operated?

• 
  The solenoid plunger lever moves the pinion drive gear into mesh with the engine flywheel

• A unidirectional clutch engages with the pinion

• The main contacts close in the solenoid connecting the heavy-duty battery cable to the motor

• 
  Rollers in the unidirectional clutch are unlocked

Which of the following steering geometry angles are adjustable on a vehicle fitted with a front beam axle?

• 
  Camber and KPI

• Camber and caster

• KPI and toe

• Caster and toe

The hand tool shown in the image is known as a:

• stud extractor used to remove a broken bolt

• starting tap used to cut the first thread

• 
  die used to cut a thread on a metal bar

• 
  finishing tap used to cut a thread in a blind hole