PC Assembly Quiz ICT 10

1. Before starting the build, which tool is most recommended?

• A. Flathead screwdriver
  

• B. #2 Phillips-head screwdriver
  

• C. Scissors
  

• D. Hammer

2. Where should you place the motherboard during CPU and RAM installation?

• A. On the carpet
  

• B. Inside the case
  

• C. On top of its box
  

3. What alignment is crucial when inserting the CPU into the socket?

• A. The arrow marks
  

• B. The color of pins
  

• C. The corner notch
  

• D. There’s no need to align

4. If your CPU cooler doesn’t come with thermal paste, what should you do?

• A. Skip the paste
  
  

• B. Apply thermal paste yourself
  

• C. Use glue
  

• D. Use water

5. Which tool is useful for installing the M.2 SSD?

• A. #2 Phillips screwdriver
  

• B. Hex nut driver
  

• C. precision Phillips screwdriver
  

• 
  D. Flathead screwdriver

6. According to Tom's Hardware, what can happen if parts aren’t compatible?

• A. Nothing
  

• B. Build may fail or parts may be damaged
  
  

• C. Computer runs slimmer
  

• D. More storage is available

7. What is the correct mounting method for the motherboard in the case?

• A. Align screw holes with standoffs
  

• B. Glue it directly
  

• C. Tape it in place
  

• D. Just set it loosely

9. Which step must be done after installing the motherboard?

• A. Install operating system
  

• B. Plug in case connectors
  

• C. Paint the case
  

• D. Remove side panel

10. Where should the 24-pin power connector from the PSU go?

• A. Directly to GPU
  

• B. To motherboard’s power socket
  

• C. To an LED strip
  

• D. Into an outlet

11. Why might you delay installing a large graphics card?

• A. It uses too much power
  

• B. It blocks access to connectors
  

• C. It’s not necessary
  

• D. It’s too heavy