Quiz-5

What type of IPv6 address is FE80::1?

• • loopback

• • link-local

• • multicast

• • global unicast

What is used in the EUI-64 process to create an IPv6 interface ID on an IPv6 enabled interface?

• • the MAC address of the IPv6 enabled interface

• • a randomly generated 64-bit hexadecimal address

• • an IPv6 address that is provided by a DHCPv6 server

• • an IPv4 address that is configured on the interface

What is the prefix for the host address 2001:DB8:BC15:A:12AB::1/64?

• • 2001:DB8:BC15

• • 2001:DB8:BC15:A

• • 2001:DB8:BC15:A:1

• • 2001:DB8:BC15:A:12

An IPv6 enabled device sends a data packet with the destination address of FF02::1. What is the target of this packet?​

• • the one IPv6 device on the link that has been uniquely configured with this address

• • all IPv6 enabled devices on the local link​ or network

• • only IPv6 DHCP servers​

• • only IPv6 configured routers

Which IPv6 prefix is reserved for communication between devices on the same link?

• • FC00::/7

• • 2001::/32

• • FE80::/10

• • FDFF::/7

What are two types of IPv6 unicast addresses? (Choose two.)

• • multicast

• • loopback

• • link-local

• • anycast

• • broadcast

Which service provides dynamic global IPv6 addressing to end devices without using a server that keeps a record of available IPv6 addresses?

• • stateful DHCPv6

• • SLAAC

• • static IPv6 addressing

• • stateless DHCPv6

Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host?

• • ARPv6

• • DHCPv6

• • ICMPv6

• • UDP

Which protocol is used by the traceroute command to send and receive echo-requests and echo-replies?

• • SNMP

• • ICMP

• • Telnet

• • TCP

What is the purpose of ICMP messages?

• • to inform routers about network topology changes

• • to ensure the delivery of an IP packet

• • to provide feedback of IP packet transmissions

• • to monitor the process of a domain name to IP address resolution