FO1 Lesson 4: Airport Operations

(Refer to FAA-CT-8080-2H, Figure 48.) Area C on the airport depicted is classified as a

• closed runway.

• stabilized area.

• multiple heliport.

(Refer to FAA-CT-8080-2H, Figure 65.) This sign is a visual clue that

• confirms the aircraft's location to be on taxiway "B."

• warns the pilot of approaching taxiway "B."

• indicates "B" holding area is ahead.

(Refer to FAA-CT-8080-2H, Figure 65.) This sign confirms your position on routing to runway 22.

• runway 22.

• taxiway 22.

Which is the correct traffic pattern departure procedure to use at a noncontrolled airport?

• Comply with any FAA traffic pattern established for the airport.

• Make all turns to the left.

• Depart in any direction consistent with safety, after crossing the airport boundary.

What purpose does the taxiway location sign serve?

• Denotes entrance to runway from a taxiway.

• Identifies taxiway on which an aircraft is located.

• Provides general taxiing direction to named runway.

(Refer to FAA-CT-8080-2H, Figure 65.) Which sign is a designation and direction of an exit taxiway from a runway?

• J.

• F.

• K.

(Refer to FAA-CT-8080-2H, Figure 65.) Which sign identifies where aircraft are prohibited from entering?

• A. D.

• B. B.

• C. G.

The numbers 8 and 26 on the approach ends of the runway indicate that the runway is orientated approximately

• 080° and 260° magnetic.

• 080° and 260° true.

• 008° and 026° true.

The recommended entry position to an airport traffic pattern is

• to enter 45° at the midpoint of the downwind leg at traffic pattern altitude.

• 45° to the base leg just below traffic pattern altitude.

• to cross directly over the airport at traffic pattern altitude and join the downwind leg.

A lighted heliport may be identified by a

• green, yellow, and white rotating beacon.

• blue lighted square landing area.

• flashing yellow light.