What characteristic describes a virus?

malicious software or code running on an end device

a network device that filters access and traffic coming into a network

the use of stolen credentials to access private data

an attack that slows or crashes a device or network service

Three bank employees are using the corporate network. The first employee uses a web browser to view a company web page in order to read some announcements. The second employee accesses the corporate database to perform some financial transactions. The third employee participates in an important live audio conference with other corporate managers in branch offices. If QoS is implemented on this network, what will be the priorities from highest to lowest of the different data types?

audio conference, financial transactions, web page

financial transactions, audio conference, web page

audio conference, web page, financial transactions

financial transactions, web page, audio conference

Refer to the exhibit. If Host1 were to transfer a file to the server, what layers of the TCP/IP model would be used?

Application, Transport, Internet, and Network Access layers

Only the Transport and Internet layers

Application and Network Access layers only

Which layers of the TCP/IP model are used for a file transfer that uses the FTP application layer protocol?

application, transport, Internet, and network access layers

only application and Internet layers

only application, transport, network, data link, and physical layers

only application, Internet, and network access layers

only Internet and network access layers

What service is provided by Internet Messenger?

An application that allows real-time chatting among remote users.

Allows remote access to network devices and servers.

Resolves domain names, such as cisco.com, into IP addresses.

Uses encryption to provide secure remote access to network devices and servers.

A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination MAC address?

It will send an ARP request for the MAC address of the default gateway.

It will send the frame and use its own MAC address as the destination.

It will send an ARP request for the MAC address of the destination device.

It will send the frame with a broadcast MAC address.

It will send a request to the DNS server for the destination MAC address.

What characteristic describes a Trojan horse?

malicious software or code running on an end device

an attack that slows or crashes a device or network service

the use of stolen credentials to access private data

a network device that filters access and traffic coming into a network

What service is provided by HTTPS?

Uses encryption to secure the exchange of text, graphic images, sound, and video on the web.

Uses encryption to provide secure remote access to network devices and servers.

Resolves domain names, such as cisco.com, into IP addresses.

Allows remote access to network devices and servers.

How does a networked application keep track of multiple sessions and have each application receive the correct packet flows?

The data flow is being tracked based on the source port number that is used by each application.

The data flow is being tracked based on the destination MAC address of the technician PC.

The data flow is being tracked based on the source IP address that is used by the PC of the technician.

The data flow is being tracked based on the destination IP address that is used by the PC of the technician.

What characteristic describes a DoS attack?

an attack that slows or crashes a device or network service

the use of stolen credentials to access private data

a network device that filters access and traffic coming into a network

software that is installed on a user device and collects information about the user

What service is provided by SMTP?

Allows clients to send email to a mail server and the servers to send email to other servers.

Allows remote access to network devices and servers.

Uses encryption to provide secure remote access to network devices and servers.

Which scenario describes a function provided by the transport layer?

A student has two web browser windows open in order to access two web sites. The transport layer ensures the correct web page is delivered to the correct browser window.

A student is using a classroom VoIP phone to call home. The unique identifier burned into the phone is a transport layer address used to contact another network device on the same network.

A student is playing a short web-based movie with sound. The movie and sound are encoded within the transport layer header.

A corporate worker is accessing a web server located on a corporate network. The transport layer formats the screen so the web page appears properly no matter what device is being used to view the web site.

Layer 2 and Layer 3 addresses are contained in the PDUs that are transmitted from host B to the router?

Layer 2 destination address = 00-00-0c-94-36-ab Layer 2 source address = 00-00-0c-94-36-bb Layer 3 destination address = 172.16.20.200 Layer 3 source address = 172.16.10.200

Layer 2 destination address = 00-00-0c-94-36-dd Layer 2 source address = 00-00-0c-94-36-bb Layer 3 destination address = 172.16.20.200 Layer 3 source address = 172.16.10.200

Layer 2 destination address = 00-00-0c-94-36-cd Layer 2 source address = 00-00-0c-94-36-bb Layer 3 destination address = 172.16.20.99 Layer 3 source address = 172.16.10.200

Layer 2 destination address = 00-00-0c-94-36-ab Layer 2 source address = 00-00-0c-94-36-bb Layer 3 destination address = 172.16.20.200 Layer 3 source address = 172.16.100.200

What does the term “attenuation” mean in data communication?

loss of signal strength as distance increases

strengthening of a signal by a networking device

leakage of signals from one cable pair to another

time for a signal to reach its destination

Refer to the exhibit. An administrator is trying to configure the switch but receives the error message that is displayed in the exhibit. What is the problem?

The administrator must first enter privileged EXEC mode before issuing the command.

The entire command, configure terminal, must be used.

The administrator is already in global configuration mode.

The administrator must connect via the console port to access global configuration mode.

What are two characteristics of IP?

does not require a dedicated end-to-end connection

operates independently of the network media

retransmits packets if errors occur

re-assembles out of order packets into the correct order at the receiver end

What are two common causes of signal degradation when using UTP cabling?

loss of light over long distances

Refer to the exhibit. On the basis of the output, which two statements about network connectivity are correct? (Choose two.)

There are 4 hops between this device and the device at 192.168.100.1.

There is connectivity between this device and the device at 192.168.100.1.

This host does not have a default gateway configured.

The connectivity between these two hosts allows for videoconferencing calls.

Which two statements describe how to assess traffic flow patterns and network traffic types using a protocol analyzer?

Capture traffic during peak utilization times to get a good representation of the different traffic types.

Perform the capture on different network segments.

Capture traffic on the weekends when most employees are off work.

Only capture traffic in the areas of the network that receive most of the traffic such as the data center.

Only capture WAN traffic because traffic to the web is responsible for the largest amount of traffic on a network.

What is the consequence of configuring a router with the ipv6 unicast-routing global configuration command?

The IPv6 enabled router interfaces begin sending ICMPv6 Router Advertisement messages.

All router interfaces will be automatically activated.

Each router interface will generate an IPv6 link-local address.

It statically creates a global unicast address on this router.

47. Refer to the exhibit. If PC1 is sending a packet to PC2 and routing has been configured between the two routers, what will R1 do with the Ethernet frame header attached by PC1?

remove the Ethernet header and configure a new Layer 2 header before sending it out S0/0/0

nothing, because the router has a route to the destination network

open the header and use it to determine whether the data is to be sent out S0/0/0

the header and replace the destination MAC address with a new one

What will happen if the default gateway address is incorrectly configured on a host?

The host cannot communicate with hosts in other networks.

The host cannot communicate with other hosts in the local network.

A ping from the host to 127.0.0.1 would not be successful.

The switch will not forward packets initiated by the host.

What are two features of ARP? (Choose two.)

If a host is ready to send a packet to a local destination device and it has the IP address but not the MAC address of the destination, it generates an ARP broadcast.

If a device receiving an ARP request has the destination IPv4 address, it responds with an ARP reply.

When a host is encapsulating a packet into a frame, it refers to the MAC address table to determine the mapping of IP addresses to MAC addresses.

An ARP request is sent to all devices on the Ethernet LAN and contains the IP address of the destination host and its multicast MAC address.

If no device responds to the ARP request, then the originating node will broadcast the data packet to all devices on the network segment.

. What is an advantage for small organizations of adopting IMAP instead of POP?

Messages are kept in the mail servers until they are manually deleted from the email client.

POP only allows the client to store messages in a centralized way, while IMAP allows distributed storage.

When the user connects to a POP server, copies of the messages are kept in the mail server for a short time, but IMAP keeps them for a long time.

IMAP sends and retrieves email, but POP only retrieves email.

CCNA 1 v7.0 Final Exam Answers Full - Introduction to Networks

Authored by Bianca Cunningham

Professional Development

Used 84+ times

CCNA 1 v7.0 Final Exam Answers Full - Introduction to Networks

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

49 questions

Show all answers

MULTIPLE SELECT QUESTION

30 mins • 1 pt

Which two traffic types use the Real-Time Transport Protocol (RTP)?

Voice

Video

Web

File transfer

Peer to peer

MULTIPLE CHOICE QUESTION

30 mins • 1 pt

Which wireless technology has low-power and data rate characteristics making it popular in home automation applications?

ZigBee

LoRaWAN

Wi-Fi

MULTIPLE CHOICE QUESTION

30 mins • 1 pt

Which layer of the TCP/IP model provides a route to forward messages through an internetwork?

application

network access

internet

transport

MULTIPLE CHOICE QUESTION

30 mins • 1 pt

Which type of server relies on record types such as A, NS, AAAA, and MX in order to provide services?

DNS

file

web

MULTIPLE CHOICE QUESTION

30 mins • 1 pt

What are proprietary protocols?

protocols developed by private organizations to operate on any vendor hardware

protocols that can be freely used by any organization or vendor

protocols developed by organizations who have control over their definition and operation

a collection of protocols known as the TCP/IP protocol suite

MULTIPLE CHOICE QUESTION

30 mins • 1 pt

What service is provided by DNS?

Resolves domain names, such as cisco.com, into IP addresses.

DNS provides email encryption services.

DNS is used to manage firewall rules.

DNS is responsible for creating user accounts.

MULTIPLE CHOICE QUESTION

30 mins • 1 pt

A client packet is received by a server. The packet has a destination port number of 110. What service is the client requesting?

DNS

DHCP

SMTP

POP3

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Popular Resources on Wayground

10 questions

Fire Safety Quiz

Quiz

•

12th Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

20 questions

Inferences

Quiz

•

4th Grade

36 questions

6th Grade Math STAAR Review

Quiz

•

6th Grade

19 questions

Classifying Quadrilaterals

Quiz

•

3rd Grade

12 questions

What makes Nebraska's government unique?

Quiz

•

4th - 5th Grade

Discover more resources for Professional Development

17 questions

Filling out Forms

Quiz

•

Professional Development

CCNA 1 v7.0 Final Exam Answers Full - Introduction to Networks

Which two traffic types use the Real-Time Transport Protocol (RTP)?

Which wireless technology has low-power and data rate characteristics making it popular in home automation applications?

Which layer of the TCP/IP model provides a route to forward messages through an internetwork?

Which type of server relies on record types such as A, NS, AAAA, and MX in order to provide services?

What are proprietary protocols?

What service is provided by DNS?

A client packet is received by a server. The packet has a destination port number of 110. What service is the client requesting?

What command can be used on a Windows PC to see the IP configuration of that computer?

A wired laser printer is attached to a home computer. That printer has been shared so that other computers on the home network can also use the printer. What networking model is in use?

What characteristic describes a virus?

Access all questions and much more by creating a free account

Popular Resources on Wayground

Discover more resources for Professional Development