quiziz setting wireless

You have an 802.11b / g Wireless card. What frequency is available for you?

• 5800MHz

• 5210MHz

• 2422MHz

• 2327MHz

 

Which type of encryption could be used to establish a connection with a simple passkey without using a 802.1X authentication server?

• WPA PSK/WPA2 PSK

• WPA EAP/WPA2 EAP

On the Wireless path with mode = ap-bridge. According to tool constraints, what is the maximum number of clients that can be connected to it?

• 2012

• 2048

• 1024

• 2007

Data rate maksimal untuk band 802.11 B adalah ?

• 11 Mbps

• 300 Mbps

• 54 Mbps

• 100 Mbps

Client dengan Band 802.11 B tidak dapat terkoneksi

dengan access point band 802.11 B/G/N

• BENAR

• SALAH

In which order are the entries in Access List and Connect List processed?

• By Signal Strength Range

• In sequence order

• By interface name

• In a random order

Kegunaan Radio Name di Radio Interface?

• Mengidentifikasi stasiun dalam Client List yang terhubung

• Mengidentifikasi stasiun di Access List

• Mengidentifikasi sebuah stasiun di Neighbor List

We have two radio cards in a point-to-point relationship with the settings:Card Number 1: mode = ap-bridge ssid = "office"frequency = 2447 band = 2.4ghz-b / g default-authentication = yes default-forwarding = yes security-profile = wpa Card Number 2: mode = ssid station = "office"frequency = 2412 band = 2.4ghz-b / g default-authentication = yes default-forwarding = yes security-profile = wpa2

Is the Nr2 Card. able to connect to Card Nr 1.?

• Yes, if Nstreme is activated or deactivated in both

• Yes, if the security profile settings are compatible with each other and Nstreme is enabled or disabled in both

• No, because of different frequencies

• No, because of different security profiles

To connect a MikroTik router to a wireless access point, you have to:

• Use the same SSID as on the access point

• Use the same radio name as on the access point

• Use the same band (5 GHz, 2.4 GHz, ...) as on the access point

Kita dapat melakukan pengaturan untuk setiap client mana saja yang akan terhubung ke Access point kita, berdasarkan paramater yang kita tentukan, seperti Mac Address, Signal Strengeth, dll.

Konfigurasi tersebut di sebut...

• Access List

• default authentication

• Connect List

• default forward