NEW
Font size
S
M
L
XL
WorksheetsTest 7 Power Equipment Safety
Total questions: 30
Worksheet time: 3600secs
Name
Class
Date
1.
Always wear eye _________________.
a)
Permission
b)
Safety
c)
Protection
d)
Attention
2.
You must have the instructors _______________ before you use any of the equipment.
a)
Permission
b)
Safely
c)
Attention
d)
Protection
3.
Use the power equipment only if you understand how to use it correctly and __________________.
a)
Permission
b)
Safely
c)
Instructor
d)
Attention
4.
The __________________ must be present in the shop whenever you use the power equipment.
a)
Safely
b)
Instructor
c)
Protection
d)
Attention
5.
Use the power tools only when you can give your full ____________ to what you are doing.
a)
Permission
b)
Instructor
c)
Protection
d)
Attention
6.
When you work with ___________________, you must make sure your hands are dry and the floor you stand on is dry.
a)
Sharp
b)
Cutting Tools
c)
Electricity
d)
Stopped
7.
When you approach a machine to use it, make sure the person who used it before you turned it off and it is completely ________________.
a)
Safety Guards
b)
Cutting Tool
c)
Electricity
d)
Stopped
8.
The cutting tool in the machine must be _______________ and in good condition.
a)
Safety Guards
b)
Sharp
c)
Electricity
d)
Stopped
9.
Be sure the _____________ is installed properly and adjusted correctly for what you want to do.
a)
Safety Guards
b)
Sharp
c)
Cutting Tool
d)
Electricity
10.
Check to see that the __________ are in place and working properly.
a)
Safety Guards
b)
Sharp
c)
Cutting tool
d)
Electricity
11.
Do not _____________ any of the safety guards unless you have the instructors permission.
a)
Adjustment
b)
Disconnect
c)
Remove
d)
Sound
12.
If a machine doesn't work properly, or if it doesn't ____________ right, turn it off and tell the instructor.
a)
Designed
b)
Disconnect
c)
Remove
d)
Sound
13.
Power tools should be used only for what they are _____________ to do.
a)
Designed
b)
Adjustment
c)
Remove
d)
Sound
14.
Get permission before you make any major _________________ or changes on the equipment.
a)
Designed
b)
Adjustment
c)
Remove
d)
Sound
15.
___________________ the power to the machine before you make any major changes or adjustments.
a)
Designed
b)
Adjustment
c)
Disconnect
d)
Remove
16.
If you disconnect the power at the circuit breaker panel, put up a ______________ that warns others not to connect it.
a)
Defects
b)
Sign
c)
Completely
d)
Lighted
17.
The machine must be turned off and ____________ stopped before any minor adjustments are made.
a)
Sign
b)
Balanced
c)
Completely
d)
Lighted
18.
Work in well _____________ areas so you can see clearly.
a)
Sign
b)
Balanced
c)
Completely
d)
Lighted
19.
Keep yourself ___________________. Don't overreach or lean on a machine.
a)
Defects
b)
Sign
c)
Balanced
d)
Lighted
20.
The material must be clean, free of _____________, hardware, or finishes.
a)
Defects
b)
Sign
c)
Balanced
d)
Lighted
21.
The cut must not be started until the machine is running at _________ speed.
a)
Tail - Off
b)
Double - Check
c)
Full
d)
Force
22.
Use an even, steady pressure to make the cut. Don't ______________ it or over-load the machine.
a)
Tail-Off
b)
Double Check
c)
Full
d)
Force
23.
If the material is large or heavy, get help. Ask someone to _____________ for you.
a)
Tail-Off
b)
Double-Check
c)
Full
d)
Force
24.
Ask the instructor to _______________ any special set-ups or attachments before you use them.
a)
Tail-Off
b)
Double-Check
c)
Distract
d)
Force
25.
Don't let anyone ________________ you while you operate the equipment.
a)
Tail-Off
b)
Distract
c)
Full
d)
Force
26.
Use a piece of scrap wood, a push stick or a __________________ to clear away scraps or dust. Don't use your hands.
a)
Attachments
b)
Brush
c)
Danger Zones
d)
Clean
27.
Stay clear of the ____________________ when someone is operating a machine.
a)
Attachments
b)
Running
c)
Danger Zones
d)
Clean
28.
Never leave a machine while it is still _______________. The machine must be stopped before you leave it.
a)
Attachments
b)
Running
c)
Danger Zones
d)
Clean
29.
When you are finished, remove any ___________ or special set-ups you may have used.
a)
Attachments
b)
Brush
c)
Danger Zones
d)
Clean
30.
_____________ the equipment and the area around it when you're finished with the work.
a)
Attachments
b)
Brush
c)
Danger Zones
d)
Clean
Reset
