WorksheetsTech Theatre Safety, Hammers, and Measuring Tools Review
Total questions: 23
Worksheet time: 12mins
Name
Class
Date
1.
Why is it not okay to work alone?
a)
In case of an injury or incident someone else can seek assistance
b)
Because the directors make up rules just for fun
c)
It's okay to work alone, you're almost an adult
d)
So that you have someone to snack with in the shop.
2.
Which is NOT a step completed in case of a medical emergency?
a)
Immediately find your director or another adult.
b)
Have someone stay with the injured individual.
c)
Administer any first aid you are capable of.
d)
Snapchat it and post it to twitter with #plenty #of #hashtags.
3.
Which of these is not a step completed in the case of a minor cut or bruise?
a)
Report to director
b)
Clean
c)
Use a band aid
d)
Post it to insta with plenty of hashtags but TELL NO ONE
4.
When can open flames be utilized onstage?
a)
When the scene calls for it
b)
Only on the weekends
c)
Never
d)
Only when Miss Thompson isn't there
5.
What is an example of proper work attire?
a)
Flip-Flops
b)
Apple Bottom Jeans and boots with the fur (with the fur)
c)
Closed - toe, Hard-soled shoes
d)
Flowy tops
6.
When using a ladder 6 feet or taller, make sure you do all of these EXCEPT:
a)
Have someone hold it for you while you are on it
b)
Have someone else help you lower it and carry it to storage when done
c)
Don't extend past your reach
d)
Leave a paint can on top of the ladder and try to move it.
7.
What prong can you remove on an electrical cord
a)
Ground Prong
b)
Neutral Prong
c)
Live Prong
d)
NONE OF THEM
8.
The most common type of hammer is the ...
a)
Claw Hammer
b)
Ball Pein Hammer
c)
Drop Saw
d)
Jackhammer
9.
What is NOT something that you can do with a claw hammer?
a)
Pull up floorboards
b)
Hammer in nails
c)
Pull up nails
d)
Break up concrete
10.
What is NOT something that is true about Ball Pein hammers?
a)
Usually used by engineers
b)
The pein is rounded for shaping metal and closing rivets
c)
Handles are normally made out of wood
d)
Handles are normally made out of fiberglass
11.
What is NOT true of cross and straight pein hammers?
a)
The pein can be at right angles to the handle or parallel with it.
b)
Mainly used for shaping metal
c)
Pein can be used for starting panel pins and tacks.
d)
Handles are normally made of concrete
12.
Club hammers are great for
a)
Bringing to club meetings after school
b)
Light masonry work
c)
Breaking up steel and diamonds
d)
Light cabinetry work
13.
What is another nickname for a club hammer?
a)
Lump Hammer
b)
Rubber Pein Hammer
c)
Sledgehammer
d)
Jackhammer
14.
Joiner's Mallets are...
a)
Usually made out of fiberglass
b)
Used to tap metal joints together
c)
Used to tap wood joints together
d)
Are not tapered on the end
15.
Power Nailers are not utilized for...
a)
Taking the hard work out of fitting nails or staples
b)
Repairing wooden deck
c)
Fixing edge mouldings and picture frames
d)
Shooting your enemies when they least expect it.
16.
How high do you lift a chalk line before you snap it?
a)
3 feet
b)
4 inches
c)
YOLO who cares?
d)
12-16 inches
17.
The most permanent color option for chalk lines is...
a)
Red Chalk
b)
Blue Chalk
c)
Yellow Chalk
d)
Green Chalk
18.
What is NOT something that you should do with a chalk line?
a)
Refill with chalk if there is not enough in the line
b)
Shake up the chalk line before starting
c)
Wipe way excess chalk
d)
Make only one line at a time
19.
A speed square is NOT known as a ...
a)
Rafter Square
b)
Rafter Angle Square
c)
Power Square
d)
Triangle or Tri Square
20.
What is NOT something that a Triangle Square can do?
a)
Mark lines on dimensional lumber
b)
Be used as a saw guide
c)
Measure 45 or 90 degree angles
d)
Measure the thickness of a rounded dowel
21.
What is NOT true about levels?
a)
The tube vial in the center of the level can help you find the true horizon (or horizontal)
b)
You can measure 45 degree angles with it
c)
The tube vials on the end can help you find the true vertical
d)
You don't need to put your eyes on the same level as the level to measure it accurately
22.
What is NOT a function of Combination Squares
a)
measuring angles
b)
determining flatness
c)
measuring the center of a circular bar or dowel
d)
used as a saw guide
23.
Who is not allowed backstage during a performance?
a)
Cast
b)
Crew
c)
Administrators
d)
Friends and Family
100 %
