NEW
Font size
S
M
L
XL
WorksheetsMicroscope Assessment
Total questions: 18
Worksheet time: 10mins
Name
Class
Date
1.
The bottom of the Microscope.
a)
Base
b)
Arm
c)
Body tube
d)
Stage
2.
These two parts hold the slide on the stage.
a)
Arm
b)
Base
c)
Stage Clips
d)
Body Tube
3.
The part that you see through.
a)
Fine Adjustment Knob
b)
Eye Piece
c)
Diaphram
d)
Stage
4.
When ready to focus the image I should do all besides ...
a)
Turn the stage down with the coarse adjustment knobs to bring specimen into focus
b)
Look at the stage while adjusting the knobs
c)
Look though the eyepiece
d)
Use fine adjustment know to gain better detail in image
5.
The part that lets you change objectives by turning it.
a)
Stage Clips
b)
Body Tube
c)
Revolving Nosepiece
d)
Base
6.
The place where the light comes from.
a)
Coarse Adjustment Knobs
b)
Diaphram
c)
Light Source
d)
Objectives
7.
It controls the amount of light going to the stage.
a)
Arm
b)
Diaphragm
c)
Eyepiece
d)
Light Source
8.
Before I use the microscope, it should be set which way?
a)
High power objective
b)
Stage up
c)
Power cord not plugged in
d)
Low power objective
9.
The large, round knob on the side of the microscope used for focusing the specimen.
a)
Stage
b)
Coarse Adjustment Knob
c)
Objectives
d)
Eyepiece
10.
What I should do when I am done looking at the specimen?
a)
Keep highest objective in place
b)
Use fine adjustment to turn stage up
c)
Turn stage down using Coarse adjustment
d)
Take slide off stage and scratch objective
11.
The long tube that holds the eyepiece and connects it to the objectives.
a)
Base
b)
Arm
c)
Body Tube
d)
Objectives
12.
There are three of these that magnify the specimen so you can be seen it better.
a)
Stage
b)
Objectives
c)
Arm
d)
Stage Clips
13.
I should do all besides which when getting ready to properly store microscope after use.
a)
Place dust cover over microscope
b)
Turn the light source out then unplug power cord from wall
c)
Place dust cover over the microscope
d)
Leave power cord lying on the table
14.
This is the part that you hold along with the Base when you are moving the microscope.
a)
Arm
b)
Body tube
c)
Diaphram
d)
Stage
15.
What I should do when I am prepared and ready to view my slide under the microscope?
a)
Place slide on stage without stage clips
b)
Keep light source off and just change the diaphragm
c)
Start with highest objective
d)
Use Coarse Adjustment Knobs to move stage up, but make sure it doesn't touch objective
16.
This is the smaller knob you use when you are trying to make smaller adjustments and clear up the image.
a)
Eyepiece
b)
Fine Adjustment Knob
c)
Diaphram
d)
Coarse adjustment knob
17.
This is where you place your slide.
a)
Base
b)
Eyepiece
c)
Stage
d)
Body Tube
18.
When I want to go to a higher power to see more detail in the specimen I will...
a)
Not look at the stage
b)
use coarse adjustment knob to focus
c)
Do not turn the revolving nosepiece
d)
use fine adjustment knob to focus
Reset
