NEW
Font size
S
M
L
XL
WorksheetsDrill Press Safety
Total questions: 21
Worksheet time: 42mins
Name
Class
Date
1.
To brush chips away from the moving drill with the fingers.
a)
Safe
b)
Unsafe
2.
To keep long hair away from the drill press spindle by keeping it tied back or covered.
a)
Safe
b)
Unsafe
3.
To leave and key or chuck in the drill press.
a)
Safe
b)
Unsafe
4.
Wear proper eye protection.
a)
Safe
b)
Unsafe
5.
To keep the long end of material being drilled to the left of the operator.
a)
Safe
b)
Unsafe
6.
To wear loose-fitting clothes while operating a drill press.
a)
Safe
b)
Unsafe
7.
To talk to someone while operating a drill press.
a)
Safe
b)
Unsafe
8.
To use caution when you have to reach around a revolving bit.
a)
Safe
b)
Unsafe
9.
To use dull drill bits
a)
Safe
b)
Unsafe
10.
To force the drill through the work as fast as it will go.
a)
Safe
b)
Unsafe
11.
To try to stop a piece of work caught on the drill bit.
a)
Safe
b)
Unsafe
12.
To wear gloves to protect yourself from burns.
a)
Safe
b)
Unsafe
13.
To drill into a container that may have contained gasoline or inflammable liquids or materials.
a)
Safe
b)
Unsafe
14.
To use auger bits in the drill press.
a)
Safe
b)
Unsafe
15.
Assume the machine is perfect so you don't have to check it before you use it.
a)
Safe
b)
Unsafe
16.
When using a larger diameter bit in the drill press you should make sure you are using a ____________ speed than when using a smaller diameter bit.
a)
Smaller
b)
Larger
c)
Slower
d)
Faster
17.
You should always remove this from the chuck after inserting and tightening a drill bit.
a)
Drill Bit
b)
Chuck Key
c)
Locking Knob
d)
Wood
18.
When drilling deeper holes you may need to back the drill out often to free the __________ of sawdust.
a)
Chuck
b)
Blade
c)
Drill
d)
Hole
19.
In order to reduce the amount of splintering on the bottom of your drill hole you should?
a)
Use a scrap piece of wood placing it underneath the wood you are drilling
b)
Ease up on the feed pressure
c)
All of the above
20.
If you need to drill duplicate holes to a desired depth what item on the drill press should you use?
a)
Clamp
b)
Depth Stop
c)
Chuck
d)
Chuck Key
21.
What are the two hazards associated with a drill press?
a)
Chuck Key/Drill Bit
b)
Drill Bit/Motor
c)
Rotating Chuck/Drill Bit
d)
Variable Speed Adjustment/Feed Wheel
Reset
