NEW
Font size
S
M
L
XL
WorksheetsJointer Safety
Total questions: 15
Worksheet time: 8mins
Name
Class
Date
1.
What is the function of a jointer?
a)
to make a rip cut on a board
b)
a woodworking machine used to produce a flat surface along a board's length and edge.
c)
to make a crosscut on a board
d)
All of the above
2.
What surface should you machine first on a board?
a)
Face
b)
Edge.
c)
End
d)
None of the above
3.
Identify the red part displayed in the photo??
a)
Guard for the belt sander
b)
Guard for the cutter head
c)
Guard for the miter saw
d)
Guard for the table saw
4.
Identify this part on this woodworking equipment.
a)
Infeed table
b)
Guard
c)
Fence
d)
Outfeed table
5.
The amount of material removed by the jointer is set by lowering the ______table
a)
Infeed
b)
Outfeed
c)
Base
d)
Guard for the cutter head
6.
You should avoid jointing an _______ on a board
a)
Face
b)
Edge
c)
End
d)
None of the above
7.
Stand to the side of the jointer, never directly in line with it, You want to be out of the way in case of a kick back.
a)
True
b)
False
8.
It's okay to joint the end grain and joint plywood or particleboard?
a)
True
b)
False
9.
No push blocks is needed if the wood is below the height of the fence or when surfacing wood
a)
True
b)
False
10.
Check all wood for knots, splits, nails or metal and other imperfections
a)
Knots
b)
Splits
c)
Nails
d)
All of the above
11.
Woodworking is a _______ skill.
a)
studied
b)
researched
c)
learned
d)
all of the above
12.
Stock to be planed of a jointer should be at least _____ inches long.
a)
12"
b)
9"
c)
16"
d)
18"
13.
What is the first step in squaring a piece of rough lumber?
a)
Face off the board using the jointer
b)
Cut rough length on miter saw
c)
Rip rough length on table saw
d)
Drill grip hole at the end of the board
14.
What is the final step to squaring a board?
a)
Cut to length (always last) using miter saw
b)
Check for squareness
c)
Cut to length (always last) using radial arm saw
d)
Joint the other edge
15.
What is the maximum cut for surfacing stock?
a)
1/32”
b)
1/8”
c)
1/4"
d)
1/16”
Reset
