NEW
Font size
S
M
L
XL
WorksheetsWoodshop Trivia
Total questions: 25
Worksheet time: 8mins
Name
Class
Date
1.
Name this type of cut that can be made using a band saw? (Hint: the cut is typically 45 degrees to form a 90 degree angle)
a)
Rip Cut
b)
Miter Cut
c)
Pizza Hut
d)
Cross Cut
2.
Name this type of cut that can be made using a band saw? (Hint: the blade is perpendicular to the wood grain)
a)
Rip Cut
b)
Angled Cut
c)
Pizza Hut
d)
Cross Cut
3.
Name this type of cut that can be made using a band saw? (Hint: the cut is parallel to the wood grain)
a)
Rip Cut
b)
Angled Cut
c)
Pizza Hut
d)
Cross Cut
4.
Name this tool, used to open and securely tighten a drill bit on the drill press.
a)
the drill lock key
b)
the drill bit key
c)
the chuck key
d)
the beef chuck key
5.
Name the blue attachment found on belt sanders and band saws. This safety device supports your material and should be used whenever possible.
a)
Fence
b)
Shield
c)
Rack
d)
Whatchamacallit
6.
When using a belt sander, only use the side of the disk that is moving...
a)
downwards
b)
upwards
c)
backwards
d)
sidewards
7.
Name this measuring tool, used for indicating whether a surface is horizontal (level) or vertical (plumb).
a)
Ruler
b)
Bubble Level
c)
Plumb Bob
d)
Fence
8.
Name this tool used for holding materials in place. You might need it when using the drill press!
a)
C-clamp
b)
G-clamp
c)
D-clamp
d)
B-lamp
9.
You tap these with a mallet to carve into wood..
a)
screw drivers
b)
nail setters
c)
chisels
d)
tooth picks
10.
Name this tool.
a)
A ball peen hammer
b)
A rubber mallet
c)
A jack hammer
d)
A claw hammer
11.
Name this tool.
a)
A ball peen hammer
b)
A rubber mallet
c)
A jack hammer
d)
A claw hammer
12.
Name this saw. It has a very thin blade and is used for cutting intricate curves.
a)
A coping saw
b)
A rip saw
c)
A dentist's saw
d)
A cross cut saw
13.
Name this type of screwdriver.
a)
A slot screwdriver
b)
A Phillips head screwdriver
c)
A Torx screwdriver
d)
This is a wrench
14.
Name this type of screwdriver.
a)
A slot screwdriver
b)
A Phillips head screwdriver
c)
A Torx screwdriver
d)
This is a chisel
15.
Name this tool. It has large grooves and is used for shaping or rubbing down objects made of metal, wood, or other hard materials.
a)
Chisel
b)
Rasp
c)
File
d)
Spike
16.
Name this tool. It has very small, fine teeth and is usually used for cutting metal.
a)
Hacksaw
b)
Jigsaw
c)
Ripsaw
d)
Chain Saw
17.
What are these? (Hint: they are used for driving finish nails at or below the surface of wood.
a)
Nail Setters
b)
Chisels
c)
Rasps
d)
Lead Pencils
18.
Name this tool. These can be used for cutting thick materials such as plastic and metals.
a)
Scissors
b)
Box Cutters
c)
Snips
d)
Pliers
19.
Name this tool. These can bend, cut and grip where fingers and other tools are too big or clumsy.
a)
Calipers
b)
Channellock pliers
c)
Snips
d)
Needle nosed pliers
20.
Name this tool. They are used for grabbing, holding and pinching things. Their name comes from the company that manufactures them.
a)
Calipers
b)
Channellock pliers
c)
Snips
d)
Needle nosed pliers
21.
Name this protective metal piece found on a band saw...
a)
Throat Plate
b)
Stomach Plate
c)
Dinner Plate
d)
Fence Plate
22.
Name this tool. Students need to be extra careful when using these. Always cut AWAY from your body!
a)
Hammer
b)
Utility Knife
c)
Rip Saw
d)
Bench Grinder
23.
Name this tool.
a)
A ruler
b)
A yardstick
c)
A tape measure
d)
A zipper zapper
24.
Name this measuring tool.
a)
Calipers
b)
Clamps
c)
Bubble Level
d)
Claw Pliers
25.
Name this tool.
a)
A claw hammer
b)
A mallet
c)
A tack hammer
d)
A tippy tapper
Reset
