WorksheetsSteering Ch. 46
Total questions: 15
Worksheet time: 8mins
Name
Class
Date
1.
What is a component of an integral power steering system?
a)
Hydroduction spooling reducer
b)
control arm
c)
pump and reservoir
d)
Wastgate
2.
What are the basic benefits of a four wheel steering system?
a)
Improved stability
b)
Reduced turning radius
c)
Improved handling
d)
All of the above
3.
Rack and pinion steering ________.
a)
is lighter in weight and has fewer components than parallelogram steering
b)
does not provide as much feel for the road as parallelogram steering
c)
does not use tie-rods in the same fashion as parallelogram steering
d)
is only used when the turbo makes too much horse pressures.
4.
The main job of the idler arm is to __________.
a)
Support the left side of the center link
b)
support the right side of the center link
c)
brace the steering box and frame
d)
binge watch walker texas ranger
5.
In a rack and pinion steering system, what protects the rack from contamination?
a)
the inner tie-rod socket
b)
spaghetti
c)
spider monkeys
d)
the bellows boots
6.
Wandering or poor straight-ahead tracking may be caused by all of the following except
a)
worn or loose rack mount bushings
b)
Minecraft Kahoot
c)
off center steering gear
d)
loose or worn tie rod ends
7.
What is the primary purpose of power-steering hoses?
a)
Defeat communism
b)
relieve pressure
c)
to transmit power through fluid under pressure
d)
non of the above
8.
A rack and pinion steering gear _____.
a)
has tie-rods that connect the rack directly to the steering arms
b)
is a gear in which the rack needs an idler arm to change the direction of the steering arms
c)
has inner tie-rod ends that are pressed onto the rack
d)
has more friction points compared to a parallelogram steering linkage
9.
Gearbox ratio is defined by the number of input turns it takes to make one turn of the output.
a)
True
b)
False
10.
Power steering sytems use hoses and lines to transmit fluid from the pump to the steering gear.
a)
True
b)
False
11.
Parallelagram steering sytem is the most commonly used sytem on compact cars today.
a)
True
b)
False
12.
Parallelgram steering systems utillize a center link to move the tie rods.
a)
True
b)
False
13.
The outer tie rod on any steering systems will be connected to the steerking knuckle.
a)
True
b)
False
14.
Steering input is transfered from the steering wheel to the steering gear by a chain.
a)
True
b)
False
15.
If a fault is present in an Electric Power Steering system, the system will mulitply the steering pressure to repair the fault.
a)
True
b)
False
100 %
