NEW
Font size
WorksheetsArchitecture: Floor Plans and Modeling
Total questions: 50
Worksheet time: 38mins
The work on the floor plan is normally started ____.
before any other drawings are completed
after the foundation has been laid
after the elevations are drawn
after the electrical plan is drawn
The floor plan is actually a ____.
roof view
section drawing
elevation drawing
none of the options
In manual drafting, interior stud walls with drywall on both sides may be drawn as a __ nominal thickness; however, in CAD, the actual dimension should be used.
4"
5"
8"
10"
The ____ opening should be shown for windows.
rough
sash width
finished
none of the options
On a floor plan, the doors are drawn as the ___ door width.
actual
rough
finished
none of the options
Which linetype is used to show an archway or plain opening on a floor plan?
object line
cutting-plane line
hidden line
centerline
What type of information for patios and swimming pools can be included on the floor plan?
location
size
material
all options
The room name should be lettered ___ larger than the surrounding lettering.
1/16"
1/8"
3/16"
1/4"
In architectural drawings, dimension lines are continuous lines with the dimension figure placed ____.
at the end of the line
above the line
under the line
at the beginning of the line
What is the recommended spacing between dimension lines?
1/4" or 3/8"
3/8" or 1/2"
1/2" or 5/8"
none of the options
Which of the following methods of showing a dimension is correct?
18"
1'-6"
both 18" and 1'-6"
none of the options
One method of dimensioning interior walls is to the ____.
inside of the wall
outside of the wall
center of the wall
all options
Overall width and length of major wall segments should be multiples of ___ to comply with building material sizes.
4'
6'
8'
10'
What scale is commonly used for residential floor plans?
half size
1"=1'-0"
1/2" = 1'-0"
1/4" = 1'-0"
What features are drawn after the exterior walls?
windows and doors
interior walls
stairs
title block and scale
Base cabinets for kitchens are drawn ___ deep while wall cabinets are ___.
24", 12"
12", 24"
16", 10"
36", 24"
What stairway information should be included in the floor plan?
location, direction, risers, width
height, length, material, depth
section, elevation, altitude, height
density, depth, length, materials
What fireplace/chimney information should be included on the floor plan?
opening and flues
width, length
location
all options
Dimension lines should be placed away from the view to prevent crowding. How far out should they be placed?
1/4" from view
3/4" from view
1" from view
2" from view
Where should the scale be located on the drawing?
bottom, under the title block
above the name block
over the floor plan
top left hand
Where should the number of each sheet be placed?
upper right
upper left
lower left
lower right
What features are NOT generally shown on the floor plan?
window and door schedule
exterior and interior walls
stairs and fireplace location
symbols and dimensions
What hatch, used in floor plan view, is represented in C?
Frame wall
Finished board
Rigid Insulation
Solid Brick Wall
What hatch, used in floor plan view, is represented in A?
Flashing
Rigid insulation
Batt insulation
Cast concrete
What hatch, used in floor plan view, is represented in B?
Flashing
Dimensional lumber
Batt insulation
Solid brick wall
What hatch, used in floor plan view, is represented in D?
Finished Board
Rigid Insulation
Batt insulation
Solid brick wall
What hatch, used in floor plan view, is represented in E?
Finished Board
Rigid Insulation
Batt insulation
Solid brick wall
What hatch, used in floor plan view, is represented in F?
Finished Board
Cast Concrete
Concrete block wall
Flashing
What hatch, used in floor plan view, is represented in A?
Finished Board
Cast Concrete
Solid Brick Wall
Flashing
What hatch, used in floor plan view, is represented in B?
Finished Board
Dimensional Lumber
Solid Brick Wall
Brick Veneer on frame wall
What hatch, used in floor plan view, is represented in C?
Finished Board
Dimensional Lumber
Solid Brick Wall
Brick Veneer on frame wall
What hatch, used in floor plan view, is represented in D?
Finished Board
Concrete block wall
Solid Brick Wall
Brick Veneer on frame wall
What commonly used door is show in area A?
Standard door, 180 degree swing (double hung)
Standard door, 90 degree swing
Standard double door, 90 degree swing
Standard double door, 180 degree swing (double hung)
What commonly used door is show in area B?
Standard door, 180 degree swing (double hung)
Standard door, 90 degree swing
Standard double door, 90 degree swing
Standard double door, 180 degree swing (double hung)
What commonly used door is show in area C?
Standard door
Sliding door
Pocket door
Double Bi-fold door
What commonly used door is show in area D?
Standard door
Sliding door
Pocket door
Double Bi-fold door
What commonly used door is show in area E?
Standard door
Sliding door
Pocket door
Double Bi-fold door
What is likely shown in area A if shown on a floor plan?
Wall
Door opening
Foundation
Window
What is likely shown in images B and C?
Brick walls
Doors
Pocket doors
Windows
What symbol is shown in D?
Water closet
Standard Toilet
WC
All options
What symbol is shown in E?
Toilet, or water closet
Sink and counter
Bath tub
Shower
What symbol is shown in F?
Toilet, or water closet
Sink and counter
Bath tub
Shower
What symbol is shown in G?
Toilet, or water closet
Sink and counter
Bath tub
Shower
What symbol is shown in A?
Water line
Clothing Washer
Water Heater
Dishwasher
What symbol is shown in B?
Clothes Dryer
Dishwasher
Dehumidifier
Drinking Fountain
What symbol is shown in C?
Water line
Clothing Washer
Water Heater
Dishwasher
What symbol is shown in D?
Clothes Dryer
Dishwasher
Dehumidifier
Drinking Fountain
What symbol is shown in E?
Refrigerator
Dishwasher
Stovetop
Oven
What symbol is shown in G?
Refrigerator
Dishwasher
Stovetop
Oven
What symbol is shown in F?
Refrigerator
Sink
Drinking fountain
Bathtub
