WorksheetsTDC Module 1 Pre Test
Total questions: 30
Worksheet time: 30mins
What is the function of clutch is....
To increase speed of an engine
To increase power of an engine
To increase torque of an engine
To engage and transmit the power from engine to gear box.
Function of DC lever
For draft setting
For lifting implements
For lowering implements
For quick lifting of implements
When to use hand accelerator
On road
On field
With tripping trolley
Both on road and field
Function of PC lever
To control the position of implement
For draft setting
Postion and draft both
None of the above
What is the function of isolator valve?
For tripping trolley
For transportaion
A or B
A and B
Tractors should only have a single rider.
True
False
When making a turn on a tractor, it is important to reduce the __________ to prevent a roll over accident.
Speed
Clutch
Throttle
Driver Stability
For tractor parking on slop, ...............must be used as a safety.
Gear
Clutch
Full throttle
Hand brake
What is the maximum speed that you can legally drive with a slow moving vehicle sign?
25 mph
30 mph
35 mph
None of the above
When checking air pressure in tyres with liquid ballast what location should the valve stem be?
12 O'clock
6 O'clock
9 O'clock
3 O'clock
Which one is a primary tillage implement ?
Disc Harrow
Disc Plough
Rigid tyne cultivator
Spring tyne cultivator
Why safety neutral switch is generally provided in tractors?
Because tractor is a high torque machine
Because children in village may start the tractor
Because farmer is not educated
Because tractor is an OPEN vehicle
Which type of clutch is used in our CRPTO Tractor model?
Single clutch
Dual clutch
Single & Dual clutch
Hydraulic clutch
What is the role of safety neutral switch in our Yuvo tractor?
Safety switch for Gear box
Safety switch for Engine
Engine will not start if Gear lever is not engaged in any gear
Engine will not start if Gear lever is engaged in any gear
In which application Reverse CRPTO is not necessary?
Air compressor
Thresher
Post hole digger
Combine harvester
In a tractor, two Independent brake pedals are provided for …..
Emergency braking
For taking sharp turn in farming application
For taking sharp turn in transportaion
For increasing the brakes life
What is the rated speed of the engine?
Maximum speed of the engine
Minimum speed of the engine
The RPM where engine delivers the maximum power
All options are incorrect
What is the purpose of Dual clutch in the Tractor?
To enhance clutch life
For easy gear shifting
Shifting the gear without iterruption to PTO
No option is correct
What type of tractor is made for planting cotton and corn?
Lawn and garden
Low clearance
Orchard and grove
Row crop
What should be done while fitting the battery on a tractor?
First connect the negative terminal
Connect any negative or positive terminal
First connect the positive terminal
No option is correct
Which statement is incorrect about a switch ?
An On and Off device in an electrical circuit
A control device in an electrical circuit
A safety device in an electrical circuit
A making or breaking device in an electrical circuit
Which is the maximum power outlet on tractor?
Drawbar power
PTO power
Hydraulic power
All of these
12.4 x 28 – 12 PR tyre size means …
12.4” is the tyre width; 28” is the Rim Diameter.
12.4 mm is the tyre thickness & 28” is the tyre height.
12.4 mm is the tyre width, 28” is the Rolling radius of the tyre.
None of the above
What are the advantages of Hydrostatic Power steering for the Tractor
Easy steering.
Provides complete isolation of the load forces from the steering wheel.
Steering is possible even if the engine is OFF.
All of the above
What is the SFC of an engine related to?
Fuel consumption values in dynamometer.
Fuel consumption values in field.
Fuel & Oil consumption values.
Oil consumption values.
Important fuel saving tips to customer are …
Always select proper gear.
Run the tractor at idle rpm.
Maintain high tyre pressure.
Run the tractor at rated rpm.
What is the function of relay?
It regulates voltage
It regulates current
It regulates Battery
None of above
To stop a tractor in the field, what should be done ?
Press the clutch
Release the accelerator, apply the brake & press the clutch simultaneously
Release the accelerator & apply the brake
Apply the brake & press the clutch simultaneously
Why you need Clutch Pedal free play in tractor ?
It ensures that the Clutch release bearing is not rubbing with fingers.
So that operator can rest his foot on pedal.
So that resting of foot on pedal will not damage the clutch.
So that clutch operation is more effective.
The use of pressurized radiator cap is to
Increase engine operating temperature
Reduce heat losses
Increase boiling point of water
Reduce evaporation loss
