When fitting GP lenses intrapalbebrally, the fitter fits the lenses

The distance between a flat surface and the back surface of the central portion of a lens is referred to as

A Lenticular Flange refers to the increase or decrease in anterior lens thickness to aid in lens positioning. If a high minus lens is riding too high or the edge of the lens is too thick the fitter would order a

A Lenticular Flange refers to the increase or decrease in anterior lens thickness to aid in lens positioning. If a high plus is riding too low, a ________ can be designed to pull the lens under the upper lid and center the lens after the blink

Vertexting for contact lens begins at

A change in the CPC by .05 mm will also change the anterior curve of the lacrimal lens by

When the CPC is fit flatter, the tear lens creates minus sphere power, therefore

When the CPC is fit steeper, the tear lens creates plus sphere power, therefore

A first generation gas permeable lens

If you increase the Optical Zone Diameter, you increase the sagittal depth, which _______ the fit.

If you decrease the Optic Zone Diameter, you decrease the sagittal depth, which _______ the fit.

If you increase the diameter of a GP lens, you ____________ the fit.

If you decrease the diameter of a GP lens, you ____________ the fit.

If peripheral curves are widened, the POZ will decrease which will _________ the fit.

Up to ________ diopter can be added to a GP lens modifying it in -house.

Tight or loose fits refer to the

Steep or flat refers to the lens

The first step in GP lens design is

The CPC is also known as the

Which of the following is NOT a hard or GP lens material?

Oxygen permeability is also known as

Oxygen transmissibility is also known as

Thickness is also known as