wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

A+ Chapter 2 Test

Total questions: 26

Worksheet time: 13mins

Name
Class
Date
1.

What does a small triangle embedded on a connector signify?

a)

use caution when using the connector

b)

the wire nearest the triangle is pin 1

c)

the pin near the triangle should be matched with a circular pin

d)

the connector is optional and need not be attached

2.

Most manufacturers or retailers of laptops offer a warranty that lasts for at least how long?

a)

1 year

b)

2 years

c)

3 years

d)

90 days

3.

What should be done after reassembling a laptop, but before installing the battery or AC adapter?

a)

Press the power button to drain any electricity in the system

b)

Attach ESD strap alligator clip to a different grounding source

c)

Gently shake the laptop to ensure nothing is loose inside of the case

d)

Remove the keyboard so that you can test proper voltage on the motherboard once the battery and/or AC adapter are reconnected.

4.

Which component may be considered a field replaceable unit (FRU)?

a)

LCD Screen

b)

Power Supply

c)

Hard Drive

d)

All of the above

5.

Which statement is true regarding the installation of the motherboard and connecting power?

a)

there are typically three screw sets that hold the motherboard to the case

b)

you can use an adapter to convert two 6-pin connectors to a PCIe connector

c)

the P1 connector is used for PCIe devices

d)

a 4-pin power cord supplies supplemental power to the processor

6.

Which statement is NOT a good practice when working inside a computer case?

a)

be sure to hold expansion cards by the edge connectors

b)

remove loose jewelry

c)

don't touch a microchip with a magnetized screwdriver

d)

don't touch the inside of a computer that is turned on

7.

What type of connector is not typically found on the front panel header?

a)

Power SW

b)

HDD LED

c)

SATA controller

d)

Power LED+

8.

If a ground strap is unavailable, what should be done to dissipate any ESD before working on a laptop?

a)

Touch any part of the laptop

b)

Wash your hands

c)

Move around prior to touching the device

d)

Touch a non-painted metallic surface on the laptop

9.

What is the second step in opening the case of a working computer?

a)

press and hold down the power button for a moment

b)

back up important data

c)

power down the system and unplug it

d)

open the case cover

10.

What is the very first step that should be taken when performing work with a computer?

a)

You should back up any important data

b)

You should ground yourself

c)

The components should be removed

d)

You should power down the system and unplug it.

11.

What diagnostic software is used by several manufacturers, and can run tests on keyboards, video, speakers, touchpad, optical drives, wireless LANs, motherboard, processor, ports, hard drive, and memory?

a)

PC-Fixit

b)

DiagNow

c)

PC-Doctor

d)

WinScan

12.

What are round plastic or metal pegs that separate the motherboard from the bottom of the case known as?

a)

header

b)

standoff

c)

insulator

d)

elevator

13.

When removing screws while working on a laptop, what should be done with the screws?

a)

They should be disposed of

b)

They should be left inside the case of the laptop

c)

They should be stored or labeled

d)

They should be painted to indicate where they go

14.

When is it okay to touch the inside of a computer that is turned on?

a)

When disassembling a computer

b)

When using a multimeter to measure the voltage output

c)

When reassembling a computer

d)

When a qualified electrician is present

15.

A system will always require what power connector?

a)

4-pin auxiliary

b)

6-pin PCIe power connector

c)

P1 power connector

d)

8-pin PCIe power connector

16.

Where should you clip your ESD strap when opening a computer case?

a)

power supply

b)

computer case

c)

electrical outlet

d)

the floor

17.

When handling motherboards, cards, or drives, which statement is NOT accurate?

a)

You should not touch chips on the device

b)

You should not hold expansion cards by the edges

c)

You should not touch any soldered components on a card

d)

You should not touch edge connectors

18.

In what order should you install components into the case after disassembling a computer?

a)

power supply, drives, motherboard, cards

b)

drives, motherboard, cards, power supply

c)

cards, motherboard, power supply, drives

d)

motherboard, drives, cards, power supply

19.

What do you call a connector on a motherboard that consists of pins that stick up from the board?

a)

jumper

b)

socket

c)

pin array

d)

header

20.

Which of the following statements regarding working inside a laptop computer is true?

a)

When upgrading a laptop, you should use components that are the same brand as the laptop, or use only recommended components

b)

If an internal component needs replacing, you should always replace the component rather than disable it.

c)

Repairing a laptop is always more cost effective than buying a new one

d)

Repairing a laptop is always more cost effective than buying a new one

21.

controls power to the motherboard, must be connected to power the PC up.

a)

Power SW

b)

Front Panel Header

c)

4 pin auxiliary

d)

Power LED

22.

a connector on a motherboard that consists of pins that stick up from the board

a)

spacer

b)

HDD LED

c)

front panel header

d)

ZIF connector

23.

positive / negative LED that controls the power light and indicates the power is on

a)

Power SW

b)

HDD LED

c)

Power LED +/-

d)

Reset SW

24.

controls the drive activity light on the front panel that lights up when any SATA or IDE device is in use

a)

Reset SW

b)

Power SW

c)

Power LED

d)

HDD LED

25.

keeps the motherboard from touching the case

a)

screws

b)

spacer

c)

bay

d)

header

26.

What is the best anime that has ever been created?

a)

Naruto

b)

Dragon Ball Z

c)

BLEACH

d)

Fullmetal Alchemist