NEW
Font size
S
M
L
XL
WorksheetsCCNP-Route-Preassessment
Total questions: 15
Worksheet time: 15mins
Name
Class
Date
1.
What is Multi-Layer switch
a)
Switch with Security Features
b)
Switch With Firewall
c)
Switch with Routing feature
d)
Switch with Wi-Fi
2.
Redundancy Protocol
a)
HSRP, VRRP
b)
RIP,EIGRP
c)
STP
d)
OSPF
3.
Dynamic Ether channel uses the following Protocol
a)
DTP
b)
LACP or PAgP
c)
RIP
d)
VTP
4.
Switch mode which will allow Add, Delete, Modify VLANs
a)
Client Mode
b)
Switching Mode
c)
Management Mode
d)
Server Mode
5.
Trunking Protocol
a)
DTP
b)
STP
c)
RIP
d)
BGP
6.
Trunk Links made for
a)
To Carry Multiple VLANs
b)
To carry IP Traffic
c)
To control Traffic
d)
To carry Single VLAN information
7.
Trunk Links need minimum bandwidth
a)
100 Mbps
b)
10 Mbps
c)
1 Gbps
d)
100 Kbps
8.
Cisco Hierarchical Model of Network Design
a)
Higher Layer, Middle Layer, Lower Layer
b)
Core Level, Distribution Level, Access Level
c)
Server Level, Client Level, Transparent Level
d)
Access Layer, Management Layer
9.
Spanning Tree Protocol, Port stats
a)
Listening, Learning, Forwarding, Blocking and Disabled
b)
Learning, Blocking, Forwarding
c)
Dynamic, Auto, Desirable
d)
Active, Passive, Auto
10.
STP Stands for, Purpose of STP…
a)
Switch Tree Protocol, to Block mac-address
b)
Spanning Tree Protocol, to avoid switching loops
c)
Spanning Tree Protocol, to avoid routing loops
d)
Spanning Tree Protocol, to enable Trunk on switch links
11.
Which Cisco IOS command is used to configure an EIGRP default route?
a)
ip route 0.0.0.0 0.0.0.0 10.1.1.1
b)
ip default-network
c)
default-information originate
d)
auto-summary
12.
Which command would configure a router with router ID 1.1.1.1?
a)
router-id 1.1.1.1 0.0.0.0
b)
router-id 1.1.1.1
c)
ospf router-id 1.1.1.1
d)
ospf router-id 1.1.1.1 0.0.0.0
13.
Which of the following options are used in standard access lists?
a)
Destination address and subnet mask
b)
Source address and subnet mask
c)
Destination address and wildcard mask
d)
Source address and wildcard mask
14.
Which type of device can be replaced by the use of sub-interfaces for VLAN routing?
a)
Layer 2 Switch
b)
Router
c)
Layer-3 Switch
d)
Bridge
15.
Which condition indicates that service password-encryption is enabled?
a)
The local username password is encrypted in configuration
b)
The enable secret is clear text in configuration
c)
The enable secret is encrypted in configuration
d)
The local username password is clear text in configuration
Reset
