NEW
Font size
WorksheetsGeneral shop safety
Total questions: 29
Worksheet time: 7hrs 15mins
Spilled Liquids as water, lacquer, and stain must be cleaned up immediately because:
It makes the shop dirty
some liquids can cause fire
they can cause a person to slip and fall
All of the above
In case of fire, you should:
Throw sawdust on it
Throw water on it
Notify the instructor
Try to smother it with oily rags
When unsure how to use a machine, ask:
The instructor
Your best friend
Another teacher
just try to figure it out on your own
Broken tools or machinery, should be reported to:
The principal
The custodian
The students
The instructor
If you are in contact with water, and electric wire or cord nearby:
You are safe as long as you don't move
You should try to dry up the water with oily shop rags
move the cord as fast as you can
Immediately step away from the water and notify the teacher
Running and joking around the shop is not permitted because:
The shop is not big enough
It might disturb other classrooms nearby.
It is dangerous and can cause personal injury
It's okay as long as your having fun doing it
Most tools are designed for a specific purpose. If they are used incorrectly, the result may be
Damage to the tool
Damage to the project
Injury to student
All of the above
If you are in the shop, you should.
Only reports it, if it hurts
At the end of class notify the instructor
Go to the health office during lunch or nutrition
Notify the instructor immediately
To avoid injury.
Do not wear jewelry.
Make sure long hair is securely tied up
none of the above
Answer A. & B. only
if the instructor is not in the room:
Students may not use any equipment
Students may use the equipment if they pass the safety test
Students can use the small tools only
Students can throw things at each other.
When in "shop" students must wear safety glasses:
only when using large power tools
Only when using small power tools
All of the above
None of the above
Sharing wood shop lockers with another student:
Is allowed as long as both students agree
Is okay as long as they both are in the same period
Is allowed and in fact encourage
Is not allowed at any time
The yellow/black caution tape in the shop indicates
Students should not use that machine
that machine is broken
That two students can be in the area at the same time
That only one student can be in that area
Why is it dangerous to talk to someone using a machine.
Because the student is not concentrating on what he is doing
Because they might want to be left alone
Because it will delay them finishing what they are doing.
Because they might make a mistake
It is important to clear off tools or wood chips before starting equipment because:
It might cause you to make a mistake on your project
You could have a accident
the tools or wood chips may fall into the machine
All of the above
Why is it important for a student to stay in the safety area until a machine comes to a stop
Because is saves energy
Because the wood shop in not very big
Because they may get hurt if the machine is still coasting
It is only important if someone is waiting to use that tool
What type of shoes must be worn in the shop
Tennis shoes
Sandals
socks only
Bare feet
Rags or paper towels that have come in contact with oils, lacquers, wood stain must be:
Thrown in a pile
Must be stored in your locker
must be thrown away in a plastic trashcan
must be throw away in a metal trashcan.
Students are allowed to use the ladder:
Only if they cannot reach something in shop
Only if they have the help from another student
only if they can lift it
Never
if you are using a tool that is not working like it should i.e strange shaking, noise or breaks
Keep turning it on or off until it works correctly.
Turn the machine off
Try to repair the machine
Turn the machine off leave your project, and get the teacher
when walking in the shop with sharp tools, always hold the sharp end
down
up
sideways
straight ahead
if you see an exposed or cracked power cord you should:
Quickly unplug it from the outlet
Quickly throw water on it
Quickly inform the instructor
Students must pass all safety tests before using a machine, in addition to:
Use the machine for two minutes, then let it cool down
turning it on and if it working, begin using it
When the dust collector is on, you may put in sawdust and wood chips the size of:
A whale
An elephant
A quarter
The instructor
when using any machine, the dust collector should be on and the vents should be:
Open
One vent open, one vent closed
Closed
Keep the dust collector off when using machines
In case of an emergency, you must
Push the emergency shut off switch and tell the instructor
Sit in the corner and eat cheese
Pretend there is no emergency
Take care of the emergency yourself
students that intentionally hurt or harm someone else can receive:
Suspension or expulsion
A referral
Permanent removal from the class
All of the above
"clean- up time" is part of your industrial technology.
True
False
Some machines that students will never use include the table saw, radical arm saw, jointer, and planer.
True
False
