NEW
Font size
S
M
L
XL
WorksheetsLEGO EV3 Building and programming
Total questions: 22
Worksheet time: 15mins
Name
Class
Date
1.
How do you turn on the EV3?
a)
Center
Button
b)
Right
Button
c)
Left
Button
d)
Top
Button
2.
How do you turn off the EV3 properly?
a)
Press
the Back button until a Shut Down dialog box appears, then select the check
with the Center button
b)
Insert the Shut Down USB adapter into the USB port on the
side of the EV3
c)
Remove the rechargable Li-Ion battery pack
d)
Press
and hold the Left and Right buttons for 5 seconds
3.
The move tank block does all of the following except
a)
move forward
b)
move backward
c)
turn left or right
d)
Sense objects
4.
This code will move the robot
a)
forward
b)
backward
c)
right
d)
left
5.
The move tank block is
a)
red
b)
yellow
c)
green
6.
a)
large motor
b)
ultrasonic sensor
c)
touch sensor
d)
medium motor
7.
a)
Bushings
b)
Beams
c)
connector pegs
d)
gears
8.
a)
Ultrasonic Sensor
b)
Touch Sensor
c)
Color Sensor
d)
Medium Motor
9.
a)
Ultrasonic Sensor
b)
Touch Sensor
c)
Color Sensor
d)
Medium Motor
10.
a)
Ultrasonic Sensor
b)
Touch Sensor
c)
Color Sensor
d)
Medium Motor
11.
a)
Brain
b)
Brick
c)
Lego
d)
Block
12.
a)
Axles
b)
Beams
c)
Gears
d)
Connector Pegs
13.
These take in data from the environment as an input to your EV3.
a)
Eyes
b)
Shields
c)
Motors
d)
Sensors
14.
are used to connect motors
a)
Switch
b)
Ports 1-4
c)
Ports
d)
Ports A-D
15.
What is this program telling the robot to do?
a)
Move straight for 3 rotations and turn 90 degrees.
b)
Move straight for 3 rotations and then move backward for 3.
c)
Turn at 90 percent power for 3 rotations.
d)
Turn at 3 percent power for 90 rotations.
16.
What is this program telling the robot to do?
a)
Go forward until the touch sensor is touched.
b)
Wait until the touch sensor is touched.
c)
Go forward until the touch sensor is touched and then move backwards.
d)
Wait until the touch sensor is touched and then move backwards.
17.
A programming command that allows a computer to choose between two sequences of code based on a conditional statement (e.g. Color = BLUE).
a)
Sensor
b)
Block
c)
Switch
d)
Touch
18.
A programming command that allows a computer to repeat a code sequence.
a)
Loop
b)
Color
c)
Robot
d)
Code
19.
What is this block called?
a)
Drive
b)
SuperTuxCart
c)
Movement Block
d)
Move Steering
20.
What is this block called?
a)
Wait
b)
Time
c)
Hourglass
d)
Go
21.
Which of the following connection types allows you to download programs onto the robot?
a)
USB cable
b)
Ethernet cable
c)
Power cable
d)
VGA cable
22.
Which of the following correctly lists the sensors that the EV3 can use?
a)
Gyro, Sound, Heat, Electrical
b)
Ultrasound, Gyro, Color, Touch
c)
Infrared, Laser, Color, Time
d)
Touch, Color, Humidity, Ultraviolet
Reset
