Font size
WorksheetsTSD's
Total questions: 10
Worksheet time: 6mins
1) Which of the following is not classed as a TSD in accordance with MCP/019/008?
Drum screen Sprag
Temporary Strainer
Spade
Feed Hydraulic blanking plug
Anti-Entombment device
Who is responsible for the review and revision of DNB/MCP/019/008?
The Operations Manager
HR Manager
Plant Manager
Maintenance manager
Who ensures that the design of all TSD’s is acceptable for use and capable of meeting system demands?
Safety Rules Champion or their nominee
Systems Engineer
Senior Authorised Person
Engineering Manager
When a TSD is required to be fitted a WOC and SD shall be requested stating which of the following? (more than one answer)
Reason for fitting
Name of competent person fitting the TSD
The precise position of where it is to be fitted
Shall have 2 drawings marked up in red identifying location.
The pipeline or plant where it is to be installed
The Safety Document for fitting a TSD shall be?
Personally retained only
Card Safe retained only
Either Personally or Card safe retained
Can be Card safe retained and kept in your pocket as long as its short duration.
Work of a minor nature can be carried out under the Safety Document for fitting a TSD.
True
False
A Safety Document is required to remove a TSD. Who is responsible for giving the location and number of the TSD required to be removed?
Senior Authorised Person
WOC Specifier
Maintenance Manager
Systems Engineer
Where blanks or spades are to be fitted they should be fitted with new joints and?
A full face joint but not adhered to it with an adhesive.
A full face joint and adhered to it with an adhesive.
Not a full face joint but not adhered to it with an adhesive.
Not a full face joint and adhered to it with an adhesive.
All TSD’s should be designed to accommodate a lock/chain.
True
False
Fill in the blanks.
______ shall be designed to be fitted between propriety flanged joints. ______ or ______ shall only be used where the pipeline is terminated or where a section of pipework has been removed. Temporary strainers shall be marked with a direction of ______. All TSDs shall be painted ______.
Blanks, Spades, plugs, fitting, Orange
Spades, blanks, plugs, flow, Orange,
Spades, blanks, plugs, fitting, Orange,
Blanks, Spades, plugs, flow, red,
