wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Firefighter - RTC Quiz

Total questions: 15

Worksheet time: 7mins

Name
Class
Date
1.

What are the six phases of an RTC?

a)

Risk assessment and scene safety. Stabalisation. Initial access. Glass management. Space Creation and Full Access. Extrication and Immobilisation.

b)

Scene safety and Risk Assessment. Stabalisation and Initial Access. Glass management. Space creation Full access Extrication and Immobilisation.

c)

Scene safety and Stabalisation. Initial Access. Glass management. Space creation. Full access. Extrication and Immobilisation.

d)

Scene safety and Dynamic Risk Assessment. Stabalisation. Glass management. Space creation. Full access. Extrication and Immobilisation.

2.

What is the working pressure of the Holamtro Hose?

a)

Inner: 780

Outer: 30

b)

Inner: 1500

Outer: 800

c)

Inner: 25

Outer: 720

d)

Inner: 720

Outer: 25

3.

What is the cutting force of Holmatro Cutters (CU 4050 NCT)?

a)

Tips: 90

Centre: 40

Maximum: 60

b)

Tips: 40

Centre: 95

Maximum: 60

c)

Tips: 40

Centre: 60

Maximum: 90

d)

Tips: 40

Centre: 60

Maximum: 95

4.

Identify the 5 Supplementary Restraint Systems.

a)

Airbags

Seat-belts

Padestrian air horn

Roll Over Protection

Head rest DVD player

b)

Seat-belt Pre-tensioners

Airbags

Roll Over Protection

Padestrian Protection

Active Head Rests

c)

Airbags

Padestrian Bags

Shopping Bags

Bag for Life

Ball Bag

d)

Seat-belts

Roll Over Protection

Child seat

Active Head Rests

Sat Nav

5.

Identify the safety considerations when risk assessing a hybrid vehicle.

a)
  1. High voltage electrical system.
  2. Larger than expected battery packs in various locations.
  3. Silent running.
  4. Automatic stop/ start.
b)
  1. High voltage electrical system.
  2. Larger than expected battery packs at the rear of the vehicle.
  3. Silent running.
  4. Keyless ignition
c)
  1. Requires an idiot to drive.
  2. Battery packs have an aluminium liner that's wrapped radially and tangentially in a carbon fibre weave and covered in an epoxy resin.
  3. Silent running therefore easy to hit and run.
  4. Engines has a clapper on/ off switch.
d)
  1. Automatic engine start and stop.
  2. Gas Struts.
  3. Silent running.
  4. Made by Toyota
6.

Which Wholetime Fire station is most likely to attend an RTC at the Dartford Crossing?

a)

Station 52

b)

Station 35

c)

Station 50

d)

Station 30

7.

If a car was found to be on its roof with casualties trapped, what full access technique would you utilise as OiC?

a)

B post rip

b)

Dashboard lift

c)

Roof removal

d)

A half Oyster/ Inverted roof flap

8.

What are the hazards when cutting Boron steel?

a)
  1. Boron is like cutting through butter.
  2. You need to cut at a 45 degree angle.
  3. Boron is a metallic nuclear isotope.
b)
  1. You need to cut at a 95 degree angle
  2. Boron is super strong.
  3. Boron should be cut with a Makita saw.
c)
  1. Boron should be cut at a 90 degre angle.
  2. Boron is a ultra high strength steel that cuts with explosive force.
  3. Poor cutting technique may cause shearing of the Holmatro blades.
d)
  1. Boron is 8 times stronger than conventional steel.
  2. Boron need to be cut at a 90 degree angle.
  3. Boron should only be cut with kitchen scissors.
9.

Air lifting units at full inflation has a capacity of?

a)

175 litres of air with a 17cm lift

b)

230 litres of air with a 17cm lift

c)

225 litres of air with a 17cm lift

d)

220 litres of air with a 17cm lift

10.

What is the hauling capacity of Tirfor Winch?

a)

25,000 kgs

b)

250 kgs

c)

2,500 kgs

d)

25 tonnes

11.

CLEAR principles consider.....

a)

Collision, Lead, Evacuate, Act, Re-open.

b)

Collision, Lead, Effective response, Act, Re-open.

c)

Cars, Lorries, Emergecy vehicles, Aeroplanes, Railway.

d)

Collision, Lead, Evaluate, Act, Re-open.

12.

Identify three significant hazards in a RTC risk area.

a)
  1. Moving Vehicles.
  2. Padestrian (Bystanders).
  3. Casualties screaming.
b)
  1. Moving Vehicles
  2. Padestrian (Bystanders).
  3. Wreckage and Debris.
c)
  1. Wreckage and Debris.
  2. Padestrian (Bystanders).
  3. Environmental conditions.
d)
  1. Padestrian (Bystanders).
  2. Complexity of Road layout.
  3. Criminal activity.
13.

Initial access should consider access by

a)

A plan only

b)

A plan and B plan

c)

A Game

d)

B plan quick access

14.

Name two types of glass

a)

Laminated and Hardened (Tempered).

b)

Laminated and Tinted

c)

Tinted and Tempered

d)

Tinie Tempahed glass

15.

What is the max force of the Holmatro Spreaders (SP 4260)?

a)

22.1 tonnes

b)

95 tonnes

c)

23.9 tonnes

d)

23 tonnes