2.__________is a hardware device designed to receive, analyze and move incoming packets to another network.

3. ____________this device is the least expensive, least intelligent, and least complicated. Its job is very simple: anything that comes in one port is sent out to the others.

4. A __________does what the hub does, but more efficiently. By paying attention to the traffic that comes across it, it learns which computers are connected to which port.

5. ____________protocol that allows a router to automatically assign connected devices local IP address.

Example: 192.168.1.101 – 192.168.1.150

6__________is a wireless standard that supports a bandwidth up to 54 Mbps and operates at a frequency range around 2.4 GHz.

7. ___________is a wireless standard that supports a bandwidth up to 11 Mbps and operates at a frequency range around 2.4 GHz

8. ____________is a wireless standard that supports up to 54 Mbps of bandwidth, operates at a frequency range around 5 GHz, and there is no signal interference

9. ___________is a wireless standard that supports up to 1300 Mbps on the 5 GHz band and up to 450 Mbps on the 2.4 GHz band.

10. __________is a wireless standard that operates at frequencies of both 2.4 GHz and 5 GHz. It supports up to 450 Mbps of bandwidth due to the utilization of multiple antennas.

11. SSID stands for “_____________" and it is used to uniquely identify any given wireless network.

12. What are the two frequencies which wireless AC operates?

13. What is the first wlan standard that was developed by the Institute of Electrical and Electronic Engineers (IEEE)? This standard supports 2 Mbps of network bandwidth.

15. _________is known as a physical address and hardware address whose number is uniquely formatted in hexadecimal format and given to each computer or network device on a computer network

16._________ allows you to control packets from devices with specified physical address in your Wireless LAN.

14. When was the first Wireless LAN standard created?