Font size
WorksheetsPower Tools Student Test PLTW
Total questions: 20
Worksheet time: 10mins
What do measuring tools and checking devices do
Simple Mesuremnet
To measure irregular as well as regular shapes.
Measuring checking the length, width or thickness of an objects shape things like the flatness, straightness, roundness or squareness.
-To
test a surface for levelness.
-To check adjacent surfaces for squareness
-To make lines across the face of edge of
stock
What do sawing tools do
Saw
cut stock to the correct length and width. They are also used to cut stock to irregular shapes
cut through wood at the exact length, or make polygon cuts
Name all Layout, Measuring, and Checking Devices (Check all that apply)
Try Square
Plane
Vise
Level
Rafter Square
What is this picture of?
A 12-inch or one foot rule. One side is divided into eighths, the other into sixteenths. A metric rule is divided into centimeters or millimeters.
A ruler
Bench ruler
A Layout, Measuring and Checking Device
Metric Ruler
What is the difference between a rip claw hammer and a claw hammer
They both work with the removing or driving of nails
One has a wedge shaped claw, while the other one has a curved one, and one is better for prying nails
Nothing, they're both the same in size, shape and purpose
They have different uses, one removes nails the other drives them in and one only has a wood handle
Why do we use mallets
to reduce the force driving the cutting edge of a chisel, giving better control.
for striking blows where steel hammers would mar or damage the surface.
For driving or removing nails
in Carpentry to knock wooden pieces together, or to drive dowels or chisels
Are Screw drivers a drilling tool
Yes
No
Select all that are tape measures
Description: A squaring, measuring, and testing tool with a metal blade and a wood or metal handle.
(what tool is this)
Try Square
Framing or Rafter Square
Coping Saw
Plane
Level
What do we use the coping saw for
To cut curves
To shape the ends of molding for joints
For scroll work
All of the above
Only 1 and 2
Chose the Miter box saw
Hint: bigger back saw
What does a compass saw look like?
A hand saw in lengths from 20” to 26” with 4 to 12 points per inch. 10 points is good for crosscutting and 5 ½ points is good for ripping.
A U-shaped saw frame permitting 4- 5/8” or 6-1/2” deep cuts. Uses standard 6-1/2” pin end blades.
A 12” or 14” taper blade saw.
What purpose do edge cutting tools serve
a tool with two knife-like edges at the ends, joined by an axle. With two handles to provide leverage, the cutting edges pinch together to cut materials
any tool that is used to remove some material from the work piece by means of shear deformation
. Single-point tools used in turning, shaping, planning and similar operations, and remove material by means of one cutting edge.
Plane, wood chisels, and utility knives
What are fastening and assembly tools
Holds work for sawing, planing, sanding, and
many other jobs.
driving or removing nails.
Holds work; removes and drives parts, and fastens things together
attaching ceiling tile, insulation, scree, and
other soft or thin materials.
How big do Auger bits come in
1 to 4
between 7'and 15'
a hole of 1/4" or larger
the circumference of 4
How big to tape measures go
ina variety of lengths from 6’ to 100’ or 2 meters to 50 meters
12-inch or one foot
A 12” or 14” taper blade
lengths from 20” to 26” with 4 to 12 points per inch.
List all the Drilling and Boring Tools listed in the PowerPoint
Auger Bit
drill
Screw Drivers
Brace
Jackhammer
What do Braces do
Holds work for sawing, planing, sanding, and many other jobs.
Straighten your teeth
used to obtain a smooth flat surface.
hold and operate bits
Single twist bit is better for boring deep holes.
How do Chisels and Screwdrivers differ
One works with metal, the other works with wood
They both perform different function
They have different heads
All of the above
They are the same
When handling tools what do we use
Safety
Care
Proper equipment
All of the above
