Font size
WorksheetsIntro. to Networking Chapter 5 Exam
Total questions: 13
Worksheet time: 7mins
Refer to the graphic. H2 has sent a broadcast message to all of the hosts. If host H1 wants to reply to the broadcast message, which statement is true?
H1 sends a uni cast message to H2, but the switch forwards it to all devices.
H1 sends a uni cast message to H2, and the switch forwards it directly to H2.
H1 sends a broadcast message to H2, and the switch forwards it to all devices.
H1 sends a multicast message to H2, and the switch forwards it directly to H2.
What is the decimal equivalent of the hexadecimal value of 3F?
18
34
45
46
63
Fill in the blank using a number.The minimum Ethernet frame size is _______ bytes. Anything smaller than that should be considered a “runt frame.”
128
64
1518
8
What is the primary purpose of ARP?
translate URLs to IP addresses
resolve IPv4 addresses to MAC addresses
provide dynamic IP configuration to network devices
convert internal private addresses to external public addresses
Refer to the exhibit. PC1 issues an ARP request because it needs to send a packet to PC3. In this scenario, what will happen next?
RT1 will forward the ARP request to PC3.
RT1 will send an ARP reply with its own Fa0/0 MAC address.
RT1 will send an ARP reply with the PC3 MAC address.
SW1 will send an ARP reply with its Fa0/1 MAC address.
RT1 will send an ARP reply with its own Fa0/1 MAC address.
Which action is taken by a Layer 2 switch when it receives a Layer 2 broadcast frame?
It drops the frame.
It sends the frame to all ports except the port on which it received the frame.
It sends the frame to all ports that are registered to forward broadcasts.
It sends the frame to all ports.
Fill in the blank.
On Ethernet networks, the hexadecimal address FF-FF-FF-FF-FF-FF represents the __________ MAC address.
broadcast
BROADCAST
Unicast
Broadcast
When the store-and-forward method of switching is in use, what part of the Ethernet frame is used to perform an error check?
CRC in the trailer
source MAC address in the header
destination MAC address in the header
protocol type in the header
Which two functions or operations are performed by the MAC sub layer? (Choose two.)
It is responsible for Media Access Control
It performs the function of NIC driver software.
It adds a header and trailer to form an OSI Layer 2 PDU.
It handles communication between upper and lower layers
It adds control information to network protocol layer data.
When a switch configuration includes a user-defined error threshold on a per-port basis, to which switching method will the switch revert when the error threshold is reached?
fragment-free
fast-forward
cut-through
store-and-forward
What type of address is 01-00-5E-0A-00-02?
an address that reaches a specific group of hosts
an address that reaches every host in the network
an address that reaches one specific host
an address that reaches every host inside a local subnet
A Layer 2 switch is used to switch incoming frames from a 1000BASE-T port to a port connected to a 100Base-T network. Which method of memory buffering would work best for this task?
port-based buffering
level 1 cache buffering
shared memory buffering
fixed configuration buffering
Refer to the exhibit. What is the destination MAC address of the Ethernet frame as it leaves the web server if the final destination is PC1?
00-60-2F-3A-07-AA
00-60-2F-3A-07-BB
00-60-2F-3A-07-CC
00-60-2F-3A-07-DD
