Font size
WorksheetsWood shop vocab. practice
Total questions: 22
Worksheet time: 11mins
What is the grain of the wood?
The long thin side of the board
Lines of patterns made by growth rings on the wood
a type of wood that has leaves all year
A manufactured product of wood chips and shavings mixed with chemicals.
What are the 3 parts of the board?
Face, edge, finish
Edge, end, grain
Length, width, face
Face, edge, end
What is Rip?
Cutting up the board into small pieces
making small marks on the board
Cutting with the grain of the board
Cutting with the face of the board
What is MDF?
Middle depth force
Mexico Doritos fruad
Mill Disection fibers
Medium density fiber
Crosscut is...
Cutting across the grain of the board
Cutting with the grain of the board
Sawing the board in half
Cutting the wood into minuscule pieces
Hard wood could be defined as...
A tree that loses all it's leaves during the winter
A tree that keeps it's leaves all year
Wood that can't be cut
Deeply colored wood
What is (a) general thing about soft wood?
Lighter weight
Easier to scratch
Harder to scratch
Rougher
What is the difference between Lumber and Plywood?
Lumber has spirals on it and Plywood has lines
Lumber is very inexpensive and Plywood is super expensive $$
Lumber is cut into flats and Plywood is cut into circles only
Lumber is made from the tree; Plywood is is manufactured from leftovers and is a man made product.
Which type of wood is ready to use, smooth and flat on all sides, is not actually the size it says it is.
Plywood
Dimensional Lumber
Mill Lumber
What type of wood is manufactured wood product, comes in sheets of 4 foot by 8 foot (made of the end of the day leftover the wood)
Mill Lumber
Dimensional Lumber
Plywood
What type of wood is rough sawn lumber, Needs Flattening and straightening often hardwood.
Plywood
Dimensional Lumber
Mill Lumber
Length is usually..
With the grain
Across the grain
Against the grain
Based off of how many blocks you can fit in it's volume
Width is usually
With the grain
Across the grain
Against the grain
As wide as a pillow
One part that is on every machine
A fence
A blade guard
a rooter
a table
Choose some tools for measuring
Ruler
Tape measure
Yardstick
All of the above
What is a crows foot?
A mark you make on wood with two lines like an arrow
An odd formation of wood grain
A drawing you can make on wood that will send you to another dimension
What is a square?
A simple tool used to make marks square to an edge as well as check the squareness of different faces, edges and ends of different materials
A 4 sided figure with volume of 8.5
A simple tool to easily cut a board in half with great speed and accuracy
A plan that is made before cutting that is drawn out and labeled with pen
The definition of Layout is ..
A drawing on a scrap of wood of what your plan is
A blue print on paper
Marking boards to cut
Going full into the project with out a plan
What should you always wear/ do when working w/ machines
Eye protection (glasses work as well) and hearing protection
Not nice clothing, hearing protection, eye protection, hair up, and a sharpie mustache
Hair up, hearing protection and be wearing a long sleeved shirt
Eye protection (glasses do not work for this), hair up if long, hearing protection
Definition of measuring (in wood working)
Pouring water into a cup and seeing how many ounces it is
seeing how far on inch is compared to a foot
to see how far you can throw the board
to see how long something is
Tools needed for layout
Pencil, square, compass
A sharp pencil, square
paper, sharp pencil, compass
Tape measure, pencil, compass, paper
We measure to the nearest
1/16
1/4
1/32
1/8
