When making any adjustments, performing maintenance, or changing the blade, You should make sure the power is off and the cord is unplugged

You should make sure the blade is the proper type for the cut you are planning

Don't pay attention to the saw

Start the machine before all handles are locked.

You should reach under the table while the machine is running.

Should a two foot perimeter around the scroll saw be kept clear of people, debris that impair traction or footing to avoid slipping.

You should Wear Safety goggles while using the Scroll Saw

You should support a large workpiece to reduce blade breaking and pinching.

Always use the hold down device by lowering and adjusting the hold down foot so that it presses lightly on the workpiece, for each new operation.

Never place your hands or fingers directly in line with the blade where you could cut them if you slipped.

Do not start the machine with the blade in contact to the workpiece

IMPOSSIBLE QUESTION