WorksheetsNetworking_Sadikur_Exam2_(Part-1)
Total questions: 20
Worksheet time: 12mins
When configuring a Cisco switch, which functionality is not the same between a router and a switch Cisco IOS CLI?
IP address assignment
CLI Help
Configuring duplex/speed
Configuring Console, VTY and enable password
What Cisco IOS command is used to enable the use of IPv4 routing on a Cisco device?
a. ip routing
b. ip unicast-routing
c. ip routing enable
d. ip enable routing
What type of route adds the host to the routing table of a Cisco device when the ip address command is issued on an interface with a state of Up/Up?
a. Local route
b. Connected route
c. Static route
d. Interface route
What is one step in identifying a VLSM overlap?
a. Calculate the subnet ID and subnet broadcast address of each subnet
b. Count how many subnets there are
c. Determine the maximum number of hosts for the largest subnet
d. Identify the smallest subnet being used
Which parameter can be used in an extended IP ACL statement to match all IP packets?
a. tcp
b. ip
c. ip-all
d. any
After logging in to a Cisco switch, which of the following banners will be displayed to the logged-in users?
a. login
b. MOTD
c. Exec.
d. Logout
When a collision occurs on a shared Ethernet network, what is the first step in recovery for the two computers in question?
a. Send a jamming signal
b. Resend the last frame right away
c. Wait for the other computer to finish
d. Do nothing until the line clears
An Ethernet address is also commonly referred to as a __________ address.
a. CAM
b. MAC
c. IP
d. Host
e. Unicast
What class of IPv4 address includes the first octet numbers from 192 to 223?
Class A
Class D
Class C
Class E
You have just completed the setup of your new Cisco 2960 switch, and you need to save your work. To save the configuration file, you would issue which of the
following commands?
a. save running-config startup-config
b. move running-config startup-config
c. copy startup-config running-config
d. copy running-config startup-config
One of the key benefits of replacing an Ethernet hub with an Ethernet switch is________.
a. Larger broadcast domains
b. An increase in the number of collision domains
c. Shared bandwidth
d. Only one device can send a frame at a time
What is the name of the Cisco proprietary tool used to advertise VLANs between switches so that all switches are automatically configured with the same VLAN numbers?
a. STP
b. ISL
c. CDP
d. VTP
If you wanted to have 12 subnets with a Class C network ID, which subnet mask would you use?
a. 255.255.255.252
b. 255.255.255.248
c. 255.255.255.240
d. 255.255.255.254
Which one of the following is NATIVE VLAN?
VLAN1
STP
FTP
TFTP
TTL is a
Layer1 header
Layer2 RFC
Application layer header
Layer3 header
Which one is the solution of VLAN Hopping?
Place unused ports in a common VLAN
Port security
Public VLAN Configuration
MAC address VLAN access maps
Which one is the wildcard mask of 192.168.24.0/23?
0.0.0.0
0.0.0.255
255.255.254.0
0.0.1.255
Multicast IP range is:
224-239
240-255
0-128
0-223
Which one is loopback address?
128.0.0.1
127.0.0.1
255.255.255.0
120.0.0.1
Which module we are finishing now?
Introduction to Internetworking
Advanced Networking
Interconnecting Network Devices
Planning Network Infrastructure
