Generally refers to the exterior lighting of a building at night by lights with controlled beams placed at a distance.

Lighting planned to provide light to satisfy the practical needs of a space.

It means of shielding the light from a fitting or from daylight to eliminate glarThey can be fixed or movable.

Designed to throw light in beams of varying width and intensity.

A floor lamp having its light source within a reflecting bowl that directs the light upward.

A system employing open sprinklers attached to a piping system connected to a water supply through which is opened by the operation of a fire detection system installed in the same areas as the sprinklers; when this valve opens, water flows into the piping system and discharges from all sprinklers attached thereto.

A system employing automatic sprinklers attached to a piping system containing water and connected to a water supply so that water discharges immediately from sprinklers opened by a fire.

The study and practice of mitigating the unwanted effects of potentially destructive fires. It involves the study of the behavior, compartmentalization, suppression and investigation of fire and its related emergencies, as well as the research and development, production, testing and application of mitigating systems.

Which of the following is not part of Passive Fire Protection (PFP)?

Identify Figure-A from the Reference above.

Identify Figure-B from the Reference above.

Identify Figure-C from the Reference above.

Which of the following is not part of Active Fire Protection (AFP)?

A means of determining whether fire protection products meet minimum performance criteria as set out in a building code or other applicable legislation. Successful tests in laboratories holding national accreditation for testing and certification result in the issuance of a certification listing.

Identify Figure-A from the Reference above.

Identify Figure-B from the Reference above.

Identify Figure-C from the Reference above.

Identify Figure-D from the Reference above

Combustible material shall not be placed within _____mm of fireplace, smoke chamber, or chimney walls when built entirely within a structure or within ____mm when the chimney is built entirely outside the structure.

Provided the capacity and reliability is acceptable, Sprinkler System may be connected to the following water supply except for:

A compound used to raise the ignition point of a flammable material, thus making it more resistant to fire.

UL label is affixed to a building material, component, or device with the authorization of Underwriters Laboratories Inc to indicate the following except for:

Identify the image shown on Fig-A.

Identify the image shown on Fig-B.

Identify the image shown on Fig-C.

Identify the image shown on Fig-D.

Pipe color Identification for Boiler Feed Water?

A water tank may be installed above the roof of the building or by separate tower for the purpose. Water from the water mains is pumped to the tank and the building draws its supply from overhead tank.

A pump in which the pressure is developed principally by the action of centrifugal force.

A centrifugal pump whose drive unit is supported by the pump having its suction and discharge flanges on approximately the same center.

Additive used to ensure that all particles of cement and water are mixed thoroughly in a concrete setting.

A process of coating steel products by immersing them in a bath of molten zinc after cleaning them

IDENTIFY Fig-A; It is a high-end residential condominium skyscraper completed in 2001 and is located in Bonifacio Global City, Philippines. It was designed using displacement-based design approach and it utilized Tuned Liquid Column Sloshing Dampers to resist wind.

IDENTIFY Fig-B; Consists of Two High-Rise Residential Towers. The First building to be applied with Viscoelastic (VE) dampers in the Philippines.

Identify Fig-C.

Identify Fig-D; It is manufactured by welding a corrugated sheet top flat steel sheet, forming a series of space or raceways for electrical and communications wiring.

It refers to an exterior angle of a masonry wall, or one of the stones or bricks forming such an angle, usually differentiated from adjoining surfaces by material, texture, color, size or projection.

It has inclined web members forming a series of equilateral triangles.

A type of roof having a sloping ends and sides meeting at an inclined projecting angle.

An intersection of two inclined roof surfaces towards which rainwater flows.

A trim that finishes the joint between a doorframe and its rough opening.

It consists of a number of flat plates rotating about a central pin, with shoulders mortised into the door edge and doorframe so as to be concealed when closed.

Windows that have operating sashes that swing inward on hinges attached to the bottom of their frames.

It consists of tubular metal mullions and rails assembled piece by piece on site to frame vision glass and spandrel units.

Refers to any plaster coat applied before the finish coat.

A laminate made of thin layers of wood plywood laminate - a sheet of material made by bonding two or more sheets or layers.

A Philippine mahogany (Shoreapolysperma) with reddish brown wood; also called red lauan.

A unit of measure for lumber equal to 1 inch thick by 12 inches wide by 12 inches long

A threaded steel bent inserted of masonry construction for securing wood or metal plates to concrete construction.

A locking mechanism distinct from a spring bolt lock. It cannot be moved to the open position except by rotating the key.

Accomplished by stressing wires or strands, called tendons, to predetermined amount by stretching them between two anchorages prior to placing concrete.

Small headless nails sometimes called barbed dowel pins. The regular size of ranges from 12mm to 5.0 cm. gauge No.8 wire or 4mm diameter

Small slender nails with small deep heads. The common variety is made in sizes from 2.5cm to 15cm in length while the flooring ones -from 5 cm to 10cm. length.

A wall that serves two dwelling units also known as party wall.

Refer to the given figures above, Identify which type of glass is Fig-G.

Refer to the given figures above, what type of glass is being in Fig-H?

Refer to the given figures above, Identify which type of glass is Fig-I.

Refer to the given figures above, Identify which type of glass is Fig-J.

Refer to the given figures above, Identify which type of glass is Fig-K.