wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

CPL Acft Tech - Support systems

Total questions: 20

Worksheet time: 10mins

Name
Class
Date
1.

Pascal's principle states that if...

a)

pressure is applied at any point to a liquid in a closed system, that same pressure is felt throughout the system

b)

pressure is applied at any point to any substance in a closed system, that same pressure is felt throughout the system

c)

pressure is applied at any point to air in a closed system, that same pressure is felt throughout the system

d)

pressure is applied at any point to a solid in a closed system, that same pressure is felt throughout the system

2.

Select all of the advantages of hydraulics over other systems

a)

relatively lightweight

b)

efficient

c)

not flammable

d)

minimal maintenance required

e)

fluid is non-corrosive

3.

Vegetable based hydraulic oil is predominantly __________ oil and is made from the __________ _____________ plant

a)

castor , Ricinus communis

b)

schellac , Atropa belladonna

c)

castor , Papaver somniferum

d)

camfer , Coriandrum sativum

e)

camfer , Digitalis purpurea

4.

What colour is mineral based hydraulic oil?

a)

Red

b)

Green

c)

Purple

d)

Blue

5.

A disadvantage of synthetic based hydraulic fluid is it...

a)

attracts moisture

b)

is prone to forming sludge

c)

is unsuitable for higher pressures

d)

it is highly flammable

6.

The purpose of a check valve in a hydraulic system is to...

a)

prevent the reverse flow of fluid

b)

limit the amount of pressure in a system

c)

initiate the movement of actuators in a system

d)

direct hydraulic fluid for system operation

7.

What is the main source of contamination in a hydraulic system?

a)

Pump

b)

Actuators

c)

Check valve

d)

Accumulator

8.

In a pressurised hydraulic system, an unloading valve...

a)

removes pressure from the pump when no service is required

b)

provides a safety release, venting fluid overboard if an overpressure occurs in the system

c)

converts pressure into mechanical energy

d)

allows pressure to flow from a diaphragm type accumulator to a bladder type accumulator

9.

Pneumatic systems...

a)

are not suitable for precise control of moving parts

b)

present an explosion hazard

c)

are heavier than a comparable hydraulic system

d)

cope with moving large or heavy surfaces better than hydraulic systems

10.

Pressures stored in a pneumatic system can be up to...

a)

3000 psi

b)

2000 psi

c)

1000 psi

d)

1500 psi

11.

The purpose of a bonding strip on an aircraft is to...

a)

remove the static charge from an aircraft into the air

b)

to keep all parts of the aircraft at the same charge

c)

earth an aircraft prior to refuelling

d)

prevent the build up of static electricity

12.

On larger aircraft, what is used to detect the formation of ice?

a)

Optical transducer

b)

Flux capacitor

c)

Flux valve

d)

Rheostat

13.

What are the broad types of ice protection systems?


Select all that apply

a)

Mechanical

b)

Fluid

c)

Thermal

d)

Aerodynamic

14.

Deicing boots should be used...

a)

prior to any ice forming on the leading edges to prevent it from forming

b)

only once the ice has reached 5mm in depth

c)

whenever forecast icing conditions are likely to be encountered

d)

only when the ice begins to affect airspeed

15.

De-icing fluid works by...

a)

lowering the freezing point of the ice

b)

raising the freezing point of the ice

c)

stripping the ice from the wings by forming a layer between the wing and the ice build up

d)

dissolving the ice by chemically breaking up the water atom into Hydrogen and Oxygen

16.

Which of these are types of fire detection mechanisms found in aircraft? Select all that apply

a)

bi-metallic switch

b)

thermocouple

c)

capacitance measuring

d)

thermal imaging

17.

A continuous loop fire detection system...

a)

has thermistor material contained within a wire

b)

uses a thermocouple to respond to increased heating in an area

c)

is only used in engines in aircraft due to their complexity

d)

once activated, must be reset by engineers on the ground

18.

The two types of fire extinguishing agents that may be used inside the cabin of an aircraft are...

a)

carbon dioxide

b)

dry powder

c)

Methyl bromide

d)

Halon

e)

Hydroflurocompounds

19.

Which statement best describes an Altitude Adjustable Oxygen system?

a)

It allows the flow of Oxygen to be adjusted by the user

b)

The regulator automatically adjusts the flow of Oxygen depending on the cabin altitude

c)

The system is only used in the passenger cabin of airliners

d)

The system is only used in the cockpit of airliners

20.

What pressure is Oxygen typically stored at in a constant Oxygen flow system?

a)

2200 psi

b)

4400 psi

c)

1100 psi

d)

3300 psi