To move a load with a pneumatic motor, the starting torque of the motor must be greater than both the ___ and the ___. (Select two)

As a rule of thumb, pneumatic cylinders are oversized by a factor of ___%

A pulled load is called a ___ load.

A regulator and a ___-way valve works well in a double-acting cylinder circuit such as a lift table.

When selecting a pneumatic motor use ___ of the available pressure at the motor to determine motor size.

Pneumatic components are sized by calculating the ___ needed by the actuators.

Air bearing size depends on the air pressure and the ___.

When a piston starts its stroke, it must ___.

Precise positioning of pistons in air cylinders ___.

To prevent rod buckling in some cylinder applications, manufacturers provide ___.

As soon as air begins to flow through a pressure regulator, the downstream pressure begins to drop off. This characteristic is called ___.

A special type of valve that increases the exhaust flow to minimize the effects of decaying exhaust pressure in a cylinder is called a ___ valve.

The photo tachometer ___.

The function of an air bearing is to ___.

___ mounted cylinders are used where the cylinder body must rotate as the cylinder operates.

The quick exhaust valve has ___ ports.

The amount of torque a pneumatic motor will generate when it begins to turn from a stopped position is the ___.

Internal cushions in a pneumatic cylinder ___.

The free air flow rates for air motors are obtained from air consumption versus ___ graphs.