WorksheetsSafety Wrap Up
Total questions: 32
Worksheet time: 24mins
Which clothing items should not be worn while in the lab? Select all that apply.
Safety Goggles
Open-toed shoes
Long necklaces
Earphones
Protective gloves
Pretend that you accidentally cut your finger when operating machinery. What should you do?
Put your hand in your pocket.
Wrap your finger in a piece of clothing.
Immediately tell your teacher.
Show your friends.
Pretend that you worked on a project in which you left sawdust and wood shavings on the table.
What should you do?
Wipe the sawdust off of the table with your hands.
Leave the sawdust for the custodian to clean up.
Wear gloves and pick up each piece of wood and sawdust individually.
Use a bench brush or hand broom to sweep the wood shavings into a dustpan.
Which clothing items should be worn while in the lab? Select all that apply
Loose clothing
Hair ties to tie back long hair
Long, dangling scarves
Close-toed shoes
Safety goggles
Safety goggles are required when operating the band saw and drill press.
True
False
As soon as you turn the band saw off the blade stops moving instantaneously.
True
False
If the key is left in the drill press and it’s turned on, the key can fly through the air and cause injury.
True
False
What is this?
Drill Key
Drill Bit
Allen Wrench
Screwdriver
What is this tool?
Drill Press
Planer
Table Saw
Band Saw
What is this tool?
Drill Press
Planer
Table Saw
Band Saw
What is this tool?
Drill Press
Planer
Table Saw
Band Saw
Disturbing another student while he is working is:
helpful
poor manners
dangerous
a normal practice
Why should liquid spilled on the floor be wiped up immediately?
looks unsightly
will stain the floor
causes more work for the janitor
may cause someone to slip and injure himself
If you are not feeling well, are on medication that impairs your judgement, or are extremely tired you should:
not work in the shop, especially operating machines
keep working, its not acceptable excuse to be idle
keep working until an accident happens, then sit down
have your friend watch you
Good safety practices include:
Cleaning up work areas
Having plenty of light
Having plenty of ventilation in the work area
All of the above
Hammers and other striking tools must be:
Checked for an expiry date
Checked for proper colors
Swung over your head
Checked for loose heads and broken handles
What should you do before making adjustments to a saw?
Clean it
Turn it off
Spray it with water
Kick it
fingers
What is the function of a jointer?
to make a rip cut on a board
a woodworking machine used to produce a flat surface along a board's edge.
to make a crosscut on a board
All of the above
When using the drill press, it is necessary to:
Tighten bits in the chuck with your hands only
Turn on the machine with the chuck key inserted into the chuck
tighten bits with the chuck key before operation
All of the above
