NEW
Font size
WorksheetsEngineering Graphics - Tools and Instruments - Lettering
Total questions: 19
Worksheet time: 10mins
_________ is used to draw curves which are not circular.
Compass
Pro circle
Protractor
French curves
The sizes from A0 to A5 increases.
True
False
What is the next size of 210 mm x 297 mm in drawing papers?
105 mm x 148 mm
148 mm x 210 mm
297 mm x 420 mm
420 mm x 594 mm
Which of the following instrument can be used to draw accurate perpendicular lines, parallel lines and angular lines?
T – square
Set square
Protractor
Mini – drafter
For drawing circles with a large radius, which of the following tool is used?
Bow compass
Lengthening bar compass
Divider
Protractors
According to the Indian Standard Institution (ISI), what is the size of the designation A3 in mm?
297 x 210
841 x 594
420 x 297
1189 x 841
The preferred size of the drawing sheets is recommended by the ______
ASME
ASTM
B.I.S.
NIST
1, i; 2, ii; 3, iii; 4, iv
1, ii; 2, iii; 3, i; 4, iv
1, ii; 2, iv; 3, iii; 4, i
1, iv; 2, iii; 3, ii; 4, i
Drawing pencils are graded according to increase in relative __________
Diameter
Hardness
Length
Sharpness
Which of the following lines are used to show that the object is cut and then viewed?
Hidden lines
Center lines
Hatching Lines
Leader lines
What is the standard length and width of the arrowhead of dimension lines?
3mm and 1mm
4mm and 2mm
3mm and 2mm
2mm and 2mm
In engineering drawing, which type of arrowhead is used?
Open (90˚)
Oblique stroke
Small open circle
Closed and filled
In 1st angle projection the positions of front and top views are __________
Top view lies above the front view
Top view lie left side to front view
Front view lies above the top view
Front view lie left side to top view
In 1st angle projection the _________ lies between ___________ and ____________
Projection plane, object, observer
Object, projection plane, observer
Reference line, side view, front view
Reference line, left side view, right side view
To represent the object on paper by orthographic projection the horizontal plane (H.P) should be placed in which way?
The H.P is placed to left side of vertical plane parallel to it
The H.P is turned in a clockwise direction up to 90 degrees
The H.P is placed to right side of vertical plane parallel to it
The H.P is turned in anti-clockwise direction up to 90 degrees
The internal angle of regular pentagon is ___ degree.
72
150
108
120
The external angle of regular hexagon is ___ degree.
108
60
120
150
Hatching lines are drawn at ___ degree to reference line
30
90
60
45
A point ‘P’ is above Horizontal Plane (HP) and behind Vertical Plane (VP). The point is in
First quadrant
Second quadrant
Third quadrant
Fourth quadrant
