NEW
Font size
WorksheetsIndustrial Tech Final
Total questions: 24
Worksheet time: 12mins
Pneumatic Tools are powered by
oil
electricity
air compressor
hydraulics
What is the 5th marking past 1 inch?
5/8 in
1 _ 5/8 in
1 _ 5/16 in
1 _ 1/4 in
What does PPE represent?
personal private equal
private protective equipment
private personal elevator
personal protective equipment
What is the 10th marking past 2 inch, in simplest form?
5/8 in
10/16 in
2 _ 10/16 in
2 _ 5/8 in
What is half way between 1/2 inch and 1 inch?
5/8 in
9/16 in
3/4 in
10/16 in
What type of wood did we use for project 2 and 3?
Red Oak
Pine
Popular
Plywood
What should NEVER be used to put out a grease fire?
Baking soda
Lid to Pot
Water
ABC fire extinguisher
Name two common causes for an accident.
Not paying attention/Singing
Not listening/Making wrong decision
Making wrong decision/Horseplay
Making wrong decision/Not paying attention
What is used to tighten bits to the drill press
screwdriver
chuck key
hex key
putty knife
OSHA stands for
Orbital Sander Hazard Association
Occupational Safety and Health Administration
Outstanding Safety Hazard Apps
What is the miter saw used for
Splitting wood
Chopping wood
Designing wood
What is the scroll saw used for
Splitting wood
Chopping wood
Designing wood
Name a tool with two ends. One is good for prying and the other for pulling nails.
claw hammer
pry bar
nail set
brad nailer
Name a tool with flexible tape that slides into a case. Used for measuring.
protractor
compass
tape measure
ruler
Name a tool with made of metal. Comes in the shape of an L. Used for framing a roof.
protractor
try square
tape measure
carpenter's square
A hand held version of the drill press. Has a keyless chuck for installing bits.
impact driver
compact drill
pneumatic drill
impact wrench
A handheld saw with a long, thin blade. Also known as a sawzall.
chop saw
circular saw
pneumatic drill
reciprocating saw
Screwdriver with a plus sign point.
phillips screwdriver
torque screwdriver
standard screwdriver
flat-head screwdriver
Tool that may look like a screwdriver, but has a socket attached to the end. Used with nuts and bolts.
adjustable wrench
combination wrench
socket
nut driver
Wrench with open end and a movable jaw.
adjustable wrench
combination wrench
socket
nut driver
What are the three views of a blueprint?
birds, front, side
front, back, side
plan, elevation, section
top, front, right
Plan view on a blueprint shows
the front view
the side of a building.
the birds eye view.
the elevation view.
Dimension lines
are dashed lines, half the thickness of an object.
are solid lines with a gap in the middle.
are short solid lines.
have arrowhead pointing to the area they are describing.
Your scale is 1 inch for every 40 feet. What would the scale dimension be if the actual dimension was 150 feet?
4.5 inches
5 inches
0.26 inches.
3.75 inches
