WorksheetsPower Tools 1.0.0
Total questions: 14
Worksheet time: 7mins
Name
Class
Date
1.
When using power tools, never engage the _____.
a)
a. locking spring
b)
b. booster
c)
c. bit shank
d)
d. trigger lock
2.
Before replacing parts such as bits, blades, or discs on any tool, you must _____.
a)
a. polish it with a fine steel wool
b)
b. recharge the tool's battery
c)
c. disconnect the power source
d)
d. inspect them for cracks
3.
Most hammer drills will not hammer until pressure is _____.
a)
a. released from the powder charge
b)
b. reached in the hydraulic cylinder
c)
c. detected at the trigger lock
d)
d. applied to the drill bit
4.
A pneumatic drill is commonly used _____.
a)
a. in areas where noise is a problem
b)
b. to supply compressed air to de-burr pipes
c)
c. when there is no source of electricity
d)
d. for intricate detail work
5.
This is a ______ bit
a)
Twist
b)
Spade
c)
Auger
d)
Forstner
6.
This is a ______ drill bit
a)
Spade
b)
Forstner
c)
Auger
d)
twist
7.
Which tool is used to drill holes in concrete
a)
b)
c)
d)
e)
8.
Name this power tool
a)
Cordless drill
b)
Impact driver
c)
Screw driver
d)
Jig Saw
9.
Name this power tool
a)
Jack hammer
b)
Cordless drill
c)
Hammer drill
d)
Impact driver
10.
Does the chuck of this drill require a key to loosen or tighten?
a)
Yes
b)
No
11.
The image is a drill chuck. Does it require a key?
a)
Yes
b)
No
12.
Before starting the drill press, what should be removed from the machine?
a)
Drill bit
b)
Chuck key
c)
Material
d)
None of the above
13.
Name this drill bit.
a)
Spade bit
b)
Auger
c)
Counter sink
d)
HSS bit
14.
What is this?
a)
A pilot drill
b)
A clearance bit
c)
A countersink
d)
A Flat bit
100 %
