2. A heavy-duty tool used to drive posts or other large stakes is a _____.

3. The proper angle for the edge of a cold chisel is _____.

4. The type of screw shown in the figure above is a(n) _____.

5. Which of the following screws comes to a relatively sharp point at the base of its drive socket?

6. How many sides does a hexagonal shape have?

7. In what way is a spud wrench different from a pipe wrench?

8. To quickly run a nut onto a bolt that resists spinning it on with the fingers, you can drive the socket with a(n) _____.

9. Another common name for lineman pliers is _____.

10. Because of its stiffness, a folding rule is better than a cloth or steel tape for measuring _____.

11. One situation that can make a measurement with a laser inaccurate is measuring to a _____.

12. When an object is plumb, it is _____.

13. In addition to level and plumb, some spirit levels can check a _____.

14. To check level conditions over a significant distance, such as a building foundation or longer distance, the best level to use is a _____.

15. Which of the following saws would likely have the fewest teeth per inch, resulting in the largest teeth?

16. The saw shown in the figure above is called a _____.

17. The best designed saw for cutting miter joints is a _____.

18. When using a utility knife, place a piece of scrap material under the object you are cutting in order to _____.

19. The safest kind of utility knife is one with a _____.

20. Shovels typically have handles made of wood or _____.

21. Before using a pick, check to be sure that the head is _____.

22. A chain fall locks its elevated load in place using _____.

23. Cable come-alongs are used to move loads _____.

24. The type of clamp shown in the figure above is a _____

25. Because of the shape of its jaws, which clamp can spread clamping pressure over a wider area than the others?