Font size
WorksheetsProcedure text
Total questions: 25
Worksheet time: 15mins
What do you learn from the text?
slicing the strawberry into two chopped square
combining the strawberry with chocolate
making chocolate dipped strawberry
dipping the slices of strawberry int the melted chocolate
cooking chocolate mixing with strawberry and the whipping cream
Complete the following statement as the steps based on the text.
Put on waxed paper-lined baking sheet ... dipping the strawberry into melted chocolate.
before
after
simultaneously
when
on going
Complete the following statement as the steps based on the text.
We have to prepare the ingredient ... we start to follow the step in cooking it.
before
after
simultaneously
when
on going
Complete the following statement as the steps based on the text.
... the chocolate melt, stir in the almond extract and cold slightly.
before
after
simultaneously
when
on going
Complete the following statement as the steps based on the text.
Freeze for about 15 minutes until the chocolate set ... dipping each strawberry into the melted chocolate.
before
after
simultaneously
when
on going
Choose true or false for the following statement based on the text!
The following statement is based on the instruction that you have to do for the second step:
"Place the melting chocolate on the microwave at medium power for a minute "
True
False
Choose true or false for the following statement based on the text!
The following ingredients are needed based on the text:
strawberry
chocolate
whipping cream
Almond fruit
True
False
Choose true or false for the following statement based on the text!
The following statement is based on the instruction that you have to do for the second step:
"Mix the chocolate and the whipping cream in a glass measuring cup or bowl"
True
False
Choose true or false for the following statement based on the text!
The following statement is based on the instruction that you have to do for the second step:
Stir in the almond extract and cool slightly in the melting chocolate.
True
False
Text 1
Last Saturday, the 12-grade students went for a trip to the botanical garden. Some teachers were also with us. We gathered together in front of the schoolyard very early in the morning. It took us about two hours by bus to get there from our school.
At the botanical garden, we did several things. First, we bought an entrance ticket. Second, we listened to our teachers’ instruction about group activities. Next, we divided ourselves into groups based on our personal interests. Then, each group followed the assigned teacher. We spent the rest of the day with our groups doing a lot of activities. It was really a fun day for us.
Text 2
Head lice can be treated by wet combing. For it to be effective, wet combing needs to be regular and thorough. These are the steps of wet combing. First, wash the hair using ordinary shampoo and apply plenty of conditioners, before using a wide-toothed comb to straighten and untangle the hair. Second, switch to the louse detection comb. Third, draw the comb down to the ends of the hair with every stroke, and check the comb for lice. Next, remove lice by wiping or rinsing the comb. Then, work methodically through the hair, section by section, so that the whole head is combed through. Finally, rinse out the conditioner and repeat the combing procedure. Repeat the procedure on days 5, 9, and 13, so that you clear young lice as they hatch before they have time to reach maturity.
(Adapted from: www.nhs.uk)
The following statements are the imperative sentences that you can do based on text 1 and 2.
You may choose more than one correct statements by writing the optional numbers.
1. Buy the ticket before entering the Botanical Garden
2. Follow the teacher’s instruction and sign
3. Do lots of activities personally
4. Use the louse detection comb to check for lice.
5. Treat a few of conditioner before having a shampoo
6. Do the steps once in four days.
(a)
Text 1
Last Saturday, the 12-grade students went for a trip to the botanical garden. Some teachers were also with us. We gathered together in front of the schoolyard very early in the morning. It took us about two hours by bus to get there from our school.
At the botanical garden, we did several things. First, we bought an entrance ticket. Second, we listened to our teachers’ instruction about group activities. Next, we divided ourselves into groups based on our personal interests. Then, each group followed the assigned teacher. We spent the rest of the day with our groups doing a lot of activities. It was really a fun day for us.
Text 2
Head lice can be treated by wet combing. For it to be effective, wet combing needs to be regular and thorough. These are the steps of wet combing. First, wash the hair using ordinary shampoo and apply plenty of conditioners, before using a wide-toothed comb to straighten and untangle the hair. Second, switch to the louse detection comb. Third, draw the comb down to the ends of the hair with every stroke, and check the comb for lice. Next, remove lice by wiping or rinsing the comb. Then, work methodically through the hair, section by section, so that the whole head is combed through. Finally, rinse out the conditioner and repeat the combing procedure. Repeat the procedure on days 5, 9, and 13, so that you clear young lice as they hatch before they have time to reach maturity.
(Adapted from: www.nhs.uk)
The following phrases contain time sequencers that you can find based on text 1 and 2.
You may choose more than one correct of it by writing the optional numbers.
1. Last Saturday
2. At the botanical garden
3. First
4. So that
5. early in the morning
6. Before
7. the whole head
8. Then
9. the ends of the hair
(a)
Head lice can be treated by wet combing. For it to be effective, wet combing needs to be regular and thorough. These are the steps of wet combing. First, wash the hair using ordinary shampoo and apply plenty of conditioners, before using a wide-toothed comb to straighten and untangle the hair. Second, switch to the louse detection comb. Third, draw the comb down to the ends of the hair with every stroke, and check the comb for lice. Next, remove lice by wiping or rinsing the comb. Then, work methodically through the hair, section by section, so that the whole head is combed through. Finally, rinse out the conditioner and repeat the combing procedure. Repeat the procedure on days 5, 9, and 13, so that you clear young lice as they hatch before they have time to reach maturity.
(Adapted from: www.nhs.uk)
The following imperative sentences are the steps of wet combing that you can follow to treat head lice. You may choose more than one correct statements by writing the optional numbers.
1. Apply the shampoo after washing the hair then plenty of conditioner.
2. Straighten and untangle the hair after having plenty of conditioners using the louse detection comb.
3. Check the comb for lice after drawing the louse detection comb down to the ends of the hair with every stroke.
4. Wipe and rinse a wide-toothed comb to remove lice.
5. Repeat the combing procedure before rinsing out the conditioner
6. Comb thoroughly the whole hair on the head methodically, rinse out conditioner and repeat it.
Clear young lice as they hatch, before they have time to reach maturity by repeating the comb procedures in four days
(a)
If you watch people bathing dogs in movies and TV shows, most of the time it seems like a joyous, fun-filled time for all involved. Unfortunately, bathing your dog in real life isn’t always such a positive experience.
Dogs do not mind being dirty and stinky — in fact, they like it quite a bit — and many are not afraid to put up a fight if they think that it will help them get out of bath time. And while watching a favourite actor run after a dog covered in soap suds may seem hilarious, it’s a lot less fun when you have to do it — or your dog is wrestling and
clawing to get as far away as possible from you.
Here are our tips for how to wash a dog that will make it a much more friendly experience for both you and your pup.
Power of a positive association
The first thing you want to do, as is true with almost anything new you introduce to your dog, is to tie the bath to something positive. In other words, offer treats, toys, and affection to get your dog to come to the bath, and every time they behave in a way that is helpful during bath time.
Start by getting them used to hopping into an empty tub and just spending time there while you give them treats or toys, and work your way up to adding warm (not hot) water.
Do not be afraid to repeat actions until they truly seem to get it. For example, if you have a dog bathtub or a specific area where you bathe your dog, get them to come to you there and offer a treat every time they obey until they come even without a treat.
Protect the ears
You want to be very careful not to get water into your dog’s ears during the bath. Not only is it uncomfortable for them, but it’s also something that can actually cause health problems. If your dog will let you do it, stuff cotton balls into his ears; if not, simply do your best to avoid spraying water into them.
Start young
If you have a puppy, start bathing her as soon as possible. She’ll be less opposed to the experience when she’s younger because she won’t have any negative associations toward it. By getting her used to it early on, you will encounter less trouble later.
Use the right shampoo
One way to make a bath even more unpleasant for your dog is to pick a shampoo that causes them to scratch or dries their skin out. Ideally, you want a mild soap that cleans and removes unwanted odours without stripping away important oils. What is the best way to ensure you are getting the right shampoo for your dog? Talk to your vet.
Work from the neck down
You not only want to keep your dog’s ears safe but also her eyes and mouth. How do you do this? By washing from the neck down. You can accomplish this by using a bucket or cup to wet your dog or using a sprayer. You can even find sprayers specifically designed for bathing a dog. So what do you do to wash your pup’s face? Use a damp washcloth.
Dry right
Many people swear by dog blow dryers, but the noise and feel is definitely something that you have to get him used to. Be careful to avoid burning his skin. The other way to go is to simply towel her off. If you are going to do this, use one of the more absorbent dog towels that can be found at most pet stores. And, of course, be prepared for the inevitable “shake” as your dog dries herself off. By making pleasant associations with bath time and remaining calm
Why do we have to start bathing a young dong as soon as possible?
To encounter less trouble
To get her used to it later
Because of having any negative association
Since she will not against it
Because she is still young
If you watch people bathing dogs in movies and TV shows, most of the time it seems like a joyous, fun-filled time for all involved. Unfortunately, bathing your dog in real life isn’t always such a positive experience.
Dogs do not mind being dirty and stinky — in fact, they like it quite a bit — and many are not afraid to put up a fight if they think that it will help them get out of bath time. And while watching a favourite actor run after a dog covered in soap suds may seem hilarious, it’s a lot less fun when you have to do it — or your dog is wrestling and
clawing to get as far away as possible from you.
Here are our tips for how to wash a dog that will make it a much more friendly experience for both you and your pup.
Power of a positive association
The first thing you want to do, as is true with almost anything new you introduce to your dog, is to tie the bath to something positive. In other words, offer treats, toys, and affection to get your dog to come to the bath, and every time they behave in a way that is helpful during bath time.
Start by getting them used to hopping into an empty tub and just spending time there while you give them treats or toys, and work your way up to adding warm (not hot) water.
Do not be afraid to repeat actions until they truly seem to get it. For example, if you have a dog bathtub or a specific area where you bathe your dog, get them to come to you there and offer a treat every time they obey until they come even without a treat.
Protect the ears
You want to be very careful not to get water into your dog’s ears during the bath. Not only is it uncomfortable for them, but it’s also something that can actually cause health problems. If your dog will let you do it, stuff cotton balls into his ears; if not, simply do your best to avoid spraying water into them.
Start young
If you have a puppy, start bathing her as soon as possible. She’ll be less opposed to the experience when she’s younger because she won’t have any negative associations toward it. By getting her used to it early on, you will encounter less trouble later.
Use the right shampoo
One way to make a bath even more unpleasant for your dog is to pick a shampoo that causes them to scratch or dries their skin out. Ideally, you want a mild soap that cleans and removes unwanted odours without stripping away important oils. What is the best way to ensure you are getting the right shampoo for your dog? Talk to your vet.
Work from the neck down
You not only want to keep your dog’s ears safe but also her eyes and mouth. How do you do this? By washing from the neck down. You can accomplish this by using a bucket or cup to wet your dog or using a sprayer. You can even find sprayers specifically designed for bathing a dog. So what do you do to wash your pup’s face? Use a damp washcloth.
Dry right
Many people swear by dog blow dryers, but the noise and feel is definitely something that you have to get him used to. Be careful to avoid burning his skin. The other way to go is to simply towel her off. If you are going to do this, use one of the more absorbent dog towels that can be found at most pet stores. And, of course, be prepared for the inevitable “shake” as your dog dries herself off. By making pleasant associations with bath time and remaining calm
Choose true or false for the following statement based on the text!
Giving the dogs some treats, toys and affection will get to come to the bath
True
False
If you watch people bathing dogs in movies and TV shows, most of the time it seems like a joyous, fun-filled time for all involved. Unfortunately, bathing your dog in real life isn’t always such a positive experience.
Dogs do not mind being dirty and stinky — in fact, they like it quite a bit — and many are not afraid to put up a fight if they think that it will help them get out of bath time. And while watching a favourite actor run after a dog covered in soap suds may seem hilarious, it’s a lot less fun when you have to do it — or your dog is wrestling and
clawing to get as far away as possible from you.
Here are our tips for how to wash a dog that will make it a much more friendly experience for both you and your pup.
Power of a positive association
The first thing you want to do, as is true with almost anything new you introduce to your dog, is to tie the bath to something positive. In other words, offer treats, toys, and affection to get your dog to come to the bath, and every time they behave in a way that is helpful during bath time.
Start by getting them used to hopping into an empty tub and just spending time there while you give them treats or toys, and work your way up to adding warm (not hot) water.
Do not be afraid to repeat actions until they truly seem to get it. For example, if you have a dog bathtub or a specific area where you bathe your dog, get them to come to you there and offer a treat every time they obey until they come even without a treat.
Protect the ears
You want to be very careful not to get water into your dog’s ears during the bath. Not only is it uncomfortable for them, but it’s also something that can actually cause health problems. If your dog will let you do it, stuff cotton balls into his ears; if not, simply do your best to avoid spraying water into them.
Start young
If you have a puppy, start bathing her as soon as possible. She’ll be less opposed to the experience when she’s younger because she won’t have any negative associations toward it. By getting her used to it early on, you will encounter less trouble later.
Use the right shampoo
One way to make a bath even more unpleasant for your dog is to pick a shampoo that causes them to scratch or dries their skin out. Ideally, you want a mild soap that cleans and removes unwanted odours without stripping away important oils. What is the best way to ensure you are getting the right shampoo for your dog? Talk to your vet.
Work from the neck down
You not only want to keep your dog’s ears safe but also her eyes and mouth. How do you do this? By washing from the neck down. You can accomplish this by using a bucket or cup to wet your dog or using a sprayer. You can even find sprayers specifically designed for bathing a dog. So what do you do to wash your pup’s face? Use a damp washcloth.
Dry right
Many people swear by dog blow dryers, but the noise and feel is definitely something that you have to get him used to. Be careful to avoid burning his skin. The other way to go is to simply towel her off. If you are going to do this, use one of the more absorbent dog towels that can be found at most pet stores. And, of course, be prepared for the inevitable “shake” as your dog dries herself off. By making pleasant associations with bath time and remaining calm
Choose true or false for the following statement based on the text!
The dogs do not care about being dirty or stinky.
True
False
If you watch people bathing dogs in movies and TV shows, most of the time it seems like a joyous, fun-filled time for all involved. Unfortunately, bathing your dog in real life isn’t always such a positive experience.
Dogs do not mind being dirty and stinky — in fact, they like it quite a bit — and many are not afraid to put up a fight if they think that it will help them get out of bath time. And while watching a favourite actor run after a dog covered in soap suds may seem hilarious, it’s a lot less fun when you have to do it — or your dog is wrestling and
clawing to get as far away as possible from you.
Here are our tips for how to wash a dog that will make it a much more friendly experience for both you and your pup.
Power of a positive association
The first thing you want to do, as is true with almost anything new you introduce to your dog, is to tie the bath to something positive. In other words, offer treats, toys, and affection to get your dog to come to the bath, and every time they behave in a way that is helpful during bath time.
Start by getting them used to hopping into an empty tub and just spending time there while you give them treats or toys, and work your way up to adding warm (not hot) water.
Do not be afraid to repeat actions until they truly seem to get it. For example, if you have a dog bathtub or a specific area where you bathe your dog, get them to come to you there and offer a treat every time they obey until they come even without a treat.
Protect the ears
You want to be very careful not to get water into your dog’s ears during the bath. Not only is it uncomfortable for them, but it’s also something that can actually cause health problems. If your dog will let you do it, stuff cotton balls into his ears; if not, simply do your best to avoid spraying water into them.
Start young
If you have a puppy, start bathing her as soon as possible. She’ll be less opposed to the experience when she’s younger because she won’t have any negative associations toward it. By getting her used to it early on, you will encounter less trouble later.
Use the right shampoo
One way to make a bath even more unpleasant for your dog is to pick a shampoo that causes them to scratch or dries their skin out. Ideally, you want a mild soap that cleans and removes unwanted odours without stripping away important oils. What is the best way to ensure you are getting the right shampoo for your dog? Talk to your vet.
Work from the neck down
You not only want to keep your dog’s ears safe but also her eyes and mouth. How do you do this? By washing from the neck down. You can accomplish this by using a bucket or cup to wet your dog or using a sprayer. You can even find sprayers specifically designed for bathing a dog. So what do you do to wash your pup’s face? Use a damp washcloth.
Dry right
Many people swear by dog blow dryers, but the noise and feel is definitely something that you have to get him used to. Be careful to avoid burning his skin. The other way to go is to simply towel her off. If you are going to do this, use one of the more absorbent dog towels that can be found at most pet stores. And, of course, be prepared for the inevitable “shake” as your dog dries herself off. By making pleasant associations with bath time and remaining calm
Choose true or false for the following statement based on the text!
Start by adding warm water after they get used to hopping into an empty tub.
True
False
If you watch people bathing dogs in movies and TV shows, most of the time it seems like a joyous, fun-filled time for all involved. Unfortunately, bathing your dog in real life isn’t always such a positive experience.
Dogs do not mind being dirty and stinky — in fact, they like it quite a bit — and many are not afraid to put up a fight if they think that it will help them get out of bath time. And while watching a favourite actor run after a dog covered in soap suds may seem hilarious, it’s a lot less fun when you have to do it — or your dog is wrestling and
clawing to get as far away as possible from you.
Here are our tips for how to wash a dog that will make it a much more friendly experience for both you and your pup.
Power of a positive association
The first thing you want to do, as is true with almost anything new you introduce to your dog, is to tie the bath to something positive. In other words, offer treats, toys, and affection to get your dog to come to the bath, and every time they behave in a way that is helpful during bath time.
Start by getting them used to hopping into an empty tub and just spending time there while you give them treats or toys, and work your way up to adding warm (not hot) water.
Do not be afraid to repeat actions until they truly seem to get it. For example, if you have a dog bathtub or a specific area where you bathe your dog, get them to come to you there and offer a treat every time they obey until they come even without a treat.
Protect the ears
You want to be very careful not to get water into your dog’s ears during the bath. Not only is it uncomfortable for them, but it’s also something that can actually cause health problems. If your dog will let you do it, stuff cotton balls into his ears; if not, simply do your best to avoid spraying water into them.
Start young
If you have a puppy, start bathing her as soon as possible. She’ll be less opposed to the experience when she’s younger because she won’t have any negative associations toward it. By getting her used to it early on, you will encounter less trouble later.
Use the right shampoo
One way to make a bath even more unpleasant for your dog is to pick a shampoo that causes them to scratch or dries their skin out. Ideally, you want a mild soap that cleans and removes unwanted odours without stripping away important oils. What is the best way to ensure you are getting the right shampoo for your dog? Talk to your vet.
Work from the neck down
You not only want to keep your dog’s ears safe but also her eyes and mouth. How do you do this? By washing from the neck down. You can accomplish this by using a bucket or cup to wet your dog or using a sprayer. You can even find sprayers specifically designed for bathing a dog. So what do you do to wash your pup’s face? Use a damp washcloth.
Dry right
Many people swear by dog blow dryers, but the noise and feel is definitely something that you have to get him used to. Be careful to avoid burning his skin. The other way to go is to simply towel her off. If you are going to do this, use one of the more absorbent dog towels that can be found at most pet stores. And, of course, be prepared for the inevitable “shake” as your dog dries herself off. By making pleasant associations with bath time and remaining calm
Choose true or false for the following statement based on the text!
Spraying the water on the dog will make them convenient in bathing.
True
False
If you watch people bathing dogs in movies and TV shows, most of the time it seems like a joyous, fun-filled time for all involved. Unfortunately, bathing your dog in real life isn’t always such a positive experience.
Dogs do not mind being dirty and stinky — in fact, they like it quite a bit — and many are not afraid to put up a fight if they think that it will help them get out of bath time. And while watching a favourite actor run after a dog covered in soap suds may seem hilarious, it’s a lot less fun when you have to do it — or your dog is wrestling and
clawing to get as far away as possible from you.
Here are our tips for how to wash a dog that will make it a much more friendly experience for both you and your pup.
Power of a positive association
The first thing you want to do, as is true with almost anything new you introduce to your dog, is to tie the bath to something positive. In other words, offer treats, toys, and affection to get your dog to come to the bath, and every time they behave in a way that is helpful during bath time.
Start by getting them used to hopping into an empty tub and just spending time there while you give them treats or toys, and work your way up to adding warm (not hot) water.
Do not be afraid to repeat actions until they truly seem to get it. For example, if you have a dog bathtub or a specific area where you bathe your dog, get them to come to you there and offer a treat every time they obey until they come even without a treat.
Protect the ears
You want to be very careful not to get water into your dog’s ears during the bath. Not only is it uncomfortable for them, but it’s also something that can actually cause health problems. If your dog will let you do it, stuff cotton balls into his ears; if not, simply do your best to avoid spraying water into them.
Start young
If you have a puppy, start bathing her as soon as possible. She’ll be less opposed to the experience when she’s younger because she won’t have any negative associations toward it. By getting her used to it early on, you will encounter less trouble later.
Use the right shampoo
One way to make a bath even more unpleasant for your dog is to pick a shampoo that causes them to scratch or dries their skin out. Ideally, you want a mild soap that cleans and removes unwanted odours without stripping away important oils. What is the best way to ensure you are getting the right shampoo for your dog? Talk to your vet.
Work from the neck down
You not only want to keep your dog’s ears safe but also her eyes and mouth. How do you do this? By washing from the neck down. You can accomplish this by using a bucket or cup to wet your dog or using a sprayer. You can even find sprayers specifically designed for bathing a dog. So what do you do to wash your pup’s face? Use a damp washcloth.
Dry right
Many people swear by dog blow dryers, but the noise and feel is definitely something that you have to get him used to. Be careful to avoid burning his skin. The other way to go is to simply towel her off. If you are going to do this, use one of the more absorbent dog towels that can be found at most pet stores. And, of course, be prepared for the inevitable “shake” as your dog dries herself off. By making pleasant associations with bath time and remaining calm
Choose true or false for the following statement based on the text!
Bathing a puppy is not recommended according to the text.
True
False
If you watch people bathing dogs in movies and TV shows, most of the time it seems like a joyous, fun-filled time for all involved. Unfortunately, bathing your dog in real life isn’t always such a positive experience.
Dogs do not mind being dirty and stinky — in fact, they like it quite a bit — and many are not afraid to put up a fight if they think that it will help them get out of bath time. And while watching a favourite actor run after a dog covered in soap suds may seem hilarious, it’s a lot less fun when you have to do it — or your dog is wrestling and
clawing to get as far away as possible from you.
Here are our tips for how to wash a dog that will make it a much more friendly experience for both you and your pup.
Power of a positive association
The first thing you want to do, as is true with almost anything new you introduce to your dog, is to tie the bath to something positive. In other words, offer treats, toys, and affection to get your dog to come to the bath, and every time they behave in a way that is helpful during bath time.
Start by getting them used to hopping into an empty tub and just spending time there while you give them treats or toys, and work your way up to adding warm (not hot) water.
Do not be afraid to repeat actions until they truly seem to get it. For example, if you have a dog bathtub or a specific area where you bathe your dog, get them to come to you there and offer a treat every time they obey until they come even without a treat.
Protect the ears
You want to be very careful not to get water into your dog’s ears during the bath. Not only is it uncomfortable for them, but it’s also something that can actually cause health problems. If your dog will let you do it, stuff cotton balls into his ears; if not, simply do your best to avoid spraying water into them.
Start young
If you have a puppy, start bathing her as soon as possible. She’ll be less opposed to the experience when she’s younger because she won’t have any negative associations toward it. By getting her used to it early on, you will encounter less trouble later.
Use the right shampoo
One way to make a bath even more unpleasant for your dog is to pick a shampoo that causes them to scratch or dries their skin out. Ideally, you want a mild soap that cleans and removes unwanted odours without stripping away important oils. What is the best way to ensure you are getting the right shampoo for your dog? Talk to your vet.
Work from the neck down
You not only want to keep your dog’s ears safe but also her eyes and mouth. How do you do this? By washing from the neck down. You can accomplish this by using a bucket or cup to wet your dog or using a sprayer. You can even find sprayers specifically designed for bathing a dog. So what do you do to wash your pup’s face? Use a damp washcloth.
Dry right
Many people swear by dog blow dryers, but the noise and feel is definitely something that you have to get him used to. Be careful to avoid burning his skin. The other way to go is to simply towel her off. If you are going to do this, use one of the more absorbent dog towels that can be found at most pet stores. And, of course, be prepared for the inevitable “shake” as your dog dries herself off. By making pleasant associations with bath time and remaining calm
Choose true or false for the following statement based on the text!
Buying the shampoo from the vet is the best way to ensure the right one.
True
False
How to Breed Leopard Geckos
Leopard geckos could be easy to breed for some, but difficult for others. In this article, you will see the simplest way to breed leopard geckos.
Things you'll need:
1. Cage for Geckos (20 gallons for two, 10 gallon more for each additional female)
2. Laying box (A plastic container filled with damp moss for the female to lay in.)
3. Incubation Medium (usually Perlite)
4. Lots of crickets dusted with calcium for egg growth
5. Very small crickets for the babies
Steps:
1. Get a male and female leopard gecko.
The males have hemipenal bulges below the vent whereas females do not. Males and females both have a V-shaped row of scales above the vent but only the male's scales here are hollow and produce wax. This wax is for scent marking their territory.
2. Prepare a large cage for the male and female to live in together.
Geckos can be kept together without the need to separate them unless you see major aggression. It is sometimes normal when first introducing a male and female for there to be a little squabbling, but this usually stops within the first week. Breeding should occur within a week.
For a pair, you will need at least a 20-gallon long tank. You may also choose to house one male with 4-5 females; add 10 gallons of space for each additional gecko. If you see major drama/fighting, separate the pair. You'll want to confirm they are not both males. If one male and one female, you can reintroduce them again later.
3. Get the incubator ready for the eggs and provide a lay box.
You can use a plastic sandwich container with a lid for this purpose. Cut an entry hole on one side and fill it with damp moss (This can be used as the moist hide too).
4. Ready the laying box to put in the cage.
Females dig to lay their eggs, so you will provide a place for them to dig. In about 4 to 5 weeks, the female will lay her eggs. Normally, you will see her digging in the laying box and laying the eggs in pairs. It will be easy to tell she has laid the eggs, particularly since she will be much thinner.
5. Place the eggs in the incubation medium.
Remove them from the laying box and be careful not to rotate or jiggle the eggs. After 24 hours of being laid, the embryo inside attaches itself to the sidewall of the egg. Rotating or jiggling this egg could cause the embryo to come loose and drown inside, killing it. If you want girls, set the incubation temperature 80 to 85 degrees; if you want males, set the temperature 90 to 95 degrees, and if you want a mix, set the temperature in the middle!
6. Observe the developing embryos.
After a few weeks, you will be able to "candle" the eggs using a small flashlight. You don't have to touch the eggs, just take them into a dark room and shine the light as close to the shell as you can. You should see pink inside with red blood vessels. The further along the eggs are, the more you will also see the baby inside as a dark mass.
After around 60 days, give or take depending on the incubation temperature, the eggs should hatch.
How to know the female geckos?
They have...
a hemipenal bulges below the vent.
a little squabbling
a wax from her skin
a V-shaped row of scales above the vent
a hollow V-shaped row of scales
How to Breed Leopard Geckos
Leopard geckos could be easy to breed for some, but difficult for others. In this article, you will see the simplest way to breed leopard geckos.
Things you'll need:
1. Cage for Geckos (20 gallons for two, 10 gallon more for each additional female)
2. Laying box (A plastic container filled with damp moss for the female to lay in.)
3. Incubation Medium (usually Perlite)
4. Lots of crickets dusted with calcium for egg growth
5. Very small crickets for the babies
Steps:
1. Get a male and female leopard gecko.
The males have hemipenal bulges below the vent whereas females do not. Males and females both have a V-shaped row of scales above the vent but only the male's scales here are hollow and produce wax. This wax is for scent marking their territory.
2. Prepare a large cage for the male and female to live in together.
Geckos can be kept together without the need to separate them unless you see major aggression. It is sometimes normal when first introducing a male and female for there to be a little squabbling, but this usually stops within the first week. Breeding should occur within a week.
For a pair, you will need at least a 20-gallon long tank. You may also choose to house one male with 4-5 females; add 10 gallons of space for each additional gecko. If you see major drama/fighting, separate the pair. You'll want to confirm they are not both males. If one male and one female, you can reintroduce them again later.
3. Get the incubator ready for the eggs and provide a lay box.
You can use a plastic sandwich container with a lid for this purpose. Cut an entry hole on one side and fill it with damp moss (This can be used as the moist hide too).
4. Ready the laying box to put in the cage.
Females dig to lay their eggs, so you will provide a place for them to dig. In about 4 to 5 weeks, the female will lay her eggs. Normally, you will see her digging in the laying box and laying the eggs in pairs. It will be easy to tell she has laid the eggs, particularly since she will be much thinner.
5. Place the eggs in the incubation medium.
Remove them from the laying box and be careful not to rotate or jiggle the eggs. After 24 hours of being laid, the embryo inside attaches itself to the sidewall of the egg. Rotating or jiggling this egg could cause the embryo to come loose and drown inside, killing it. If you want girls, set the incubation temperature 80 to 85 degrees; if you want males, set the temperature 90 to 95 degrees, and if you want a mix, set the temperature in the middle!
6. Observe the developing embryos.
After a few weeks, you will be able to "candle" the eggs using a small flashlight. You don't have to touch the eggs, just take them into a dark room and shine the light as close to the shell as you can. You should see pink inside with red blood vessels. The further along the eggs are, the more you will also see the baby inside as a dark mass.
After around 60 days, give or take depending on the incubation temperature, the eggs should hatch.
Here are some tips that you need to treat the eggs of geckok acoordance to the text.
Keep the eggs of geckos inside the laying box
set 90 to 95 degrees to get males and females
Rotate or jiggle it to attach the embryo inside
Put it in the incubation medium carefully.
Remove it from the lying box after 24 hours hatched
How to Breed Leopard Geckos
Leopard geckos could be easy to breed for some, but difficult for others. In this article, you will see the simplest way to breed leopard geckos.
Things you'll need:
1. Cage for Geckos (20 gallons for two, 10 gallon more for each additional female)
2. Laying box (A plastic container filled with damp moss for the female to lay in.)
3. Incubation Medium (usually Perlite)
4. Lots of crickets dusted with calcium for egg growth
5. Very small crickets for the babies
Steps:
1. Get a male and female leopard gecko.
The males have hemipenal bulges below the vent whereas females do not. Males and females both have a V-shaped row of scales above the vent but only the male's scales here are hollow and produce wax. This wax is for scent marking their territory.
2. Prepare a large cage for the male and female to live in together.
Geckos can be kept together without the need to separate them unless you see major aggression. It is sometimes normal when first introducing a male and female for there to be a little squabbling, but this usually stops within the first week. Breeding should occur within a week.
For a pair, you will need at least a 20-gallon long tank. You may also choose to house one male with 4-5 females; add 10 gallons of space for each additional gecko. If you see major drama/fighting, separate the pair. You'll want to confirm they are not both males. If one male and one female, you can reintroduce them again later.
3. Get the incubator ready for the eggs and provide a lay box.
You can use a plastic sandwich container with a lid for this purpose. Cut an entry hole on one side and fill it with damp moss (This can be used as the moist hide too).
4. Ready the laying box to put in the cage.
Females dig to lay their eggs, so you will provide a place for them to dig. In about 4 to 5 weeks, the female will lay her eggs. Normally, you will see her digging in the laying box and laying the eggs in pairs. It will be easy to tell she has laid the eggs, particularly since she will be much thinner.
5. Place the eggs in the incubation medium.
Remove them from the laying box and be careful not to rotate or jiggle the eggs. After 24 hours of being laid, the embryo inside attaches itself to the sidewall of the egg. Rotating or jiggling this egg could cause the embryo to come loose and drown inside, killing it. If you want girls, set the incubation temperature 80 to 85 degrees; if you want males, set the temperature 90 to 95 degrees, and if you want a mix, set the temperature in the middle!
6. Observe the developing embryos.
After a few weeks, you will be able to "candle" the eggs using a small flashlight. You don't have to touch the eggs, just take them into a dark room and shine the light as close to the shell as you can. You should see pink inside with red blood vessels. The further along the eggs are, the more you will also see the baby inside as a dark mass.
After around 60 days, give or take depending on the incubation temperature, the eggs should hatch.
It is sometimes normal when first introducing a male and female for there to be a little squabbling.
The closed meaning of squabbling is ....
fighting
killing
Playing
laying
introducing
How to Breed Leopard Geckos
Leopard geckos could be easy to breed for some, but difficult for others. In this article, you will see the simplest way to breed leopard geckos.
Things you'll need:
1. Cage for Geckos (20 gallons for two, 10 gallon more for each additional female)
2. Laying box (A plastic container filled with damp moss for the female to lay in.)
3. Incubation Medium (usually Perlite)
4. Lots of crickets dusted with calcium for egg growth
5. Very small crickets for the babies
Steps:
1. Get a male and female leopard gecko.
The males have hemipenal bulges below the vent whereas females do not. Males and females both have a V-shaped row of scales above the vent but only the male's scales here are hollow and produce wax. This wax is for scent marking their territory.
2. Prepare a large cage for the male and female to live in together.
Geckos can be kept together without the need to separate them unless you see major aggression. It is sometimes normal when first introducing a male and female for there to be a little squabbling, but this usually stops within the first week. Breeding should occur within a week.
For a pair, you will need at least a 20-gallon long tank. You may also choose to house one male with 4-5 females; add 10 gallons of space for each additional gecko. If you see major drama/fighting, separate the pair. You'll want to confirm they are not both males. If one male and one female, you can reintroduce them again later.
3. Get the incubator ready for the eggs and provide a lay box.
You can use a plastic sandwich container with a lid for this purpose. Cut an entry hole on one side and fill it with damp moss (This can be used as the moist hide too).
4. Ready the laying box to put in the cage.
Females dig to lay their eggs, so you will provide a place for them to dig. In about 4 to 5 weeks, the female will lay her eggs. Normally, you will see her digging in the laying box and laying the eggs in pairs. It will be easy to tell she has laid the eggs, particularly since she will be much thinner.
5. Place the eggs in the incubation medium.
Remove them from the laying box and be careful not to rotate or jiggle the eggs. After 24 hours of being laid, the embryo inside attaches itself to the sidewall of the egg. Rotating or jiggling this egg could cause the embryo to come loose and drown inside, killing it. If you want girls, set the incubation temperature 80 to 85 degrees; if you want males, set the temperature 90 to 95 degrees, and if you want a mix, set the temperature in the middle!
6. Observe the developing embryos.
After a few weeks, you will be able to "candle" the eggs using a small flashlight. You don't have to touch the eggs, just take them into a dark room and shine the light as close to the shell as you can. You should see pink inside with red blood vessels. The further along the eggs are, the more you will also see the baby inside as a dark mass.
After around 60 days, give or take depending on the incubation temperature, the eggs should hatch.
How can we see the baby of geckos inside the egg?
using the wax
lighting the egg
touching the egg
Roterring the egg
putting in the dark room
How to Breed Leopard Geckos
Leopard geckos could be easy to breed for some, but difficult for others. In this article, you will see the simplest way to breed leopard geckos.
Things you'll need:
1. Cage for Geckos (20 gallons for two, 10 gallon more for each additional female)
2. Laying box (A plastic container filled with damp moss for the female to lay in.)
3. Incubation Medium (usually Perlite)
4. Lots of crickets dusted with calcium for egg growth
5. Very small crickets for the babies
Steps:
1. Get a male and female leopard gecko.
The males have hemipenal bulges below the vent whereas females do not. Males and females both have a V-shaped row of scales above the vent but only the male's scales here are hollow and produce wax. This wax is for scent marking their territory.
2. Prepare a large cage for the male and female to live in together.
Geckos can be kept together without the need to separate them unless you see major aggression. It is sometimes normal when first introducing a male and female for there to be a little squabbling, but this usually stops within the first week. Breeding should occur within a week.
For a pair, you will need at least a 20-gallon long tank. You may also choose to house one male with 4-5 females; add 10 gallons of space for each additional gecko. If you see major drama/fighting, separate the pair. You'll want to confirm they are not both males. If one male and one female, you can reintroduce them again later.
3. Get the incubator ready for the eggs and provide a lay box.
You can use a plastic sandwich container with a lid for this purpose. Cut an entry hole on one side and fill it with damp moss (This can be used as the moist hide too).
4. Ready the laying box to put in the cage.
Females dig to lay their eggs, so you will provide a place for them to dig. In about 4 to 5 weeks, the female will lay her eggs. Normally, you will see her digging in the laying box and laying the eggs in pairs. It will be easy to tell she has laid the eggs, particularly since she will be much thinner.
5. Place the eggs in the incubation medium.
Remove them from the laying box and be careful not to rotate or jiggle the eggs. After 24 hours of being laid, the embryo inside attaches itself to the sidewall of the egg. Rotating or jiggling this egg could cause the embryo to come loose and drown inside, killing it. If you want girls, set the incubation temperature 80 to 85 degrees; if you want males, set the temperature 90 to 95 degrees, and if you want a mix, set the temperature in the middle!
6. Observe the developing embryos.
After a few weeks, you will be able to "candle" the eggs using a small flashlight. You don't have to touch the eggs, just take them into a dark room and shine the light as close to the shell as you can. You should see pink inside with red blood vessels. The further along the eggs are, the more you will also see the baby inside as a dark mass.
After around 60 days, give or take depending on the incubation temperature, the eggs should hatch.
How to know the female gecko has laid the egg in accordance with the text?
(a)
How to Breed Leopard Geckos
Leopard geckos could be easy to breed for some, but difficult for others. In this article, you will see the simplest way to breed leopard geckos.
Things you'll need:
1. Cage for Geckos (20 gallons for two, 10 gallon more for each additional female)
2. Laying box (A plastic container filled with damp moss for the female to lay in.)
3. Incubation Medium (usually Perlite)
4. Lots of crickets dusted with calcium for egg growth
5. Very small crickets for the babies
Steps:
1. Get a male and female leopard gecko.
The males have hemipenal bulges below the vent whereas females do not. Males and females both have a V-shaped row of scales above the vent but only the male's scales here are hollow and produce wax. This wax is for scent marking their territory.
2. Prepare a large cage for the male and female to live in together.
Geckos can be kept together without the need to separate them unless you see major aggression. It is sometimes normal when first introducing a male and female for there to be a little squabbling, but this usually stops within the first week. Breeding should occur within a week.
For a pair, you will need at least a 20-gallon long tank. You may also choose to house one male with 4-5 females; add 10 gallons of space for each additional gecko. If you see major drama/fighting, separate the pair. You'll want to confirm they are not both males. If one male and one female, you can reintroduce them again later.
3. Get the incubator ready for the eggs and provide a lay box.
You can use a plastic sandwich container with a lid for this purpose. Cut an entry hole on one side and fill it with damp moss (This can be used as the moist hide too).
4. Ready the laying box to put in the cage.
Females dig to lay their eggs, so you will provide a place for them to dig. In about 4 to 5 weeks, the female will lay her eggs. Normally, you will see her digging in the laying box and laying the eggs in pairs. It will be easy to tell she has laid the eggs, particularly since she will be much thinner.
5. Place the eggs in the incubation medium.
Remove them from the laying box and be careful not to rotate or jiggle the eggs. After 24 hours of being laid, the embryo inside attaches itself to the sidewall of the egg. Rotating or jiggling this egg could cause the embryo to come loose and drown inside, killing it. If you want girls, set the incubation temperature 80 to 85 degrees; if you want males, set the temperature 90 to 95 degrees, and if you want a mix, set the temperature in the middle!
6. Observe the developing embryos.
After a few weeks, you will be able to "candle" the eggs using a small flashlight. You don't have to touch the eggs, just take them into a dark room and shine the light as close to the shell as you can. You should see pink inside with red blood vessels. The further along the eggs are, the more you will also see the baby inside as a dark mass.
After around 60 days, give or take depending on the incubation temperature, the eggs should hatch.
How is the simplest way to breed leopard geckos according to the text?
Touch the eggs to see pink inside with red blood vessels and the baby.
Keep the eggs of geckos inside the laying box until they hatch.
Separate geckos when they have major aggression in a different cage.
Use a glasses incubator ready for the eggs and provide it for a lay
Prepare the laying box for female geckos outside the incubator.
