Font size
WorksheetsMetals - Metalwork Equipment (KS 3)
Total questions: 18
Worksheet time: 11mins
Name the tool.
Tenon saw
Coping saw
Junior hacksaw
Hacksaw
Name the tool.
File
Rasp
Chisel
Surform
Name the tool.
Tenon saw
Coping saw
Junior hack saw
Hack saw
Soft jaws are needed when working with aluminium because;
the steel jaws are harder than the aluminium
the steel jaws are tougher than the aluminium
the steel jaws are stronger than the aluminium
the steel jaws are more malleable than the aluminium
Name the tool;
Try square
Set square
Engineer's square
Angle square
Name the tool;
Claw hammer
Ball pein hammer
Pin hammer
Cross pein hammer
Name the tool;
Scriber
Scratcher
Centre punch
Bradawl
Name the tool;
Scriber
Bradawl
Pin punch
Centre punch
Name the tool;
Metal ruler
Measurer
Metal rule
Tape measure
Name the tool;
Compasses
Dividers
Separators
Curvers
Name the tool;
Wire wool
Glass paper
Wet and dry paper
Emery cloth
Name the tool;
Wire wool
Glass paper
Wet and dry paper
Emery cloth
Name the tool;
Wire wool
Glass paper
Wet and dry paper
Emery cloth
Deburring metals;
Improve safety
Improve the way metal products feel
Improve the way metals look
Reduce the cost of metal products
Surface finishes are applied to materials...
To make them cheaper to produce.
To improve a materials aesthetics.
To improve a materials functionality.
To improve the material's ability to be recycled.
Surface finishes that are commonly used to prevent steel from rusting;
polishing
dip coating
oil bluing
galvanising
painting
A drill bit is used to remove the burr after drilling metals because...
using a file would cause it to break
a file will not work
it is quicker than using a file
filing is unsuitable as it would cause a lot of surface scratching
Metals should be centre punched before drilling...
to make it easier to drill through the metal
to make it quicker to drill through the metal
to ensure the drill bit stays in the correct place
to make it cheaper to drill through the metal
