Type of wires that connect the service weather head to the house.

Type of wires and cables are generally black insulate THHN wire. These are use to power the main junction box and the circuit

breaker panels.

Type of wires use in most homes and has 2-3 conductors, each with plastic insulation, and a bare ground wire. Since it’s relatively cheaper and available in ratings for 15, 20 and 20 amps, this type is preferred for in-house wiring.

Type of wires are usually use in single-phase service drop conductors, between the power pole and weather heads. They are compose of two insulated aluminum wires wrap with a third bare wire which is use as a common neutral.

It is the composition of one or more electrical cables and their corresponding connectors.

Type of wiring selected should conform to standard specifications, so that it is durable without being affected by the weather conditions, fumes etc.

Type of wiring done in domestic premises (houses), for providing electrical power for lighting, fans and domestic appliances with all the safety precautions.

Type of electrical wiring normally uses a three-phase design. In three phase electrical systems, there are two smaller legs running 120 Volts.

It is factors affecting the choice of wiring in which the Electrical wiring should give an aesthetic appeal to the interiors.

It is factors affecting the choice of wiring in which it must be protected against any mechanical damage.

It is factors affecting the choice of wiring in which the switches and plug points provided should be easily accessible. There must be provision for further extension of the wiring system, if necessary.

It is factors affecting the choice of wiring in which it must be provide safety against leakage, shock and fire hazards for the operating personnel.

It is a term generally refers to insulated conductor used to carry current and associated device. This article describes general aspects of electrical wiring as used to provide power in buildings and structures, commonly referred to as building wiring.

It uses a three-phase design to create higher output to power high voltage equipment and multiple systems. Sensitive and power-hungry machinery often require special, heavy-duty outlets.