NEW
Font size
WorksheetsQuiz
Total questions: 25
Worksheet time: 13mins
First aid is
A permanent treatment
An immediate treatment
A delayed treatment
Which of the following is NOT a safety rule?
You should never eat in the workshop
Do not play in the workshop
Always eat in the workshop
Which of the following is a safety rule?
Always listen to your teacher
Always play in the workshop
Do not put up the tools after using them
If someone has been cut, they should first
Place a bandage on it
Go to the hospital
Clean the wound
If you have a blister, your should always
Pop it
Avoid popping it
Squeeze it
A damaged tenon saw will
Still cut well
Not cut properly
Still work
Tools which are not in use should be placed
In the tool rack
On the floor
In the working area
The Tenon Saw is used for
Cutting metal
Cutting wood of small section
Cutting wood of large section
The stiffening rib is a part of
The Tenon Saw
The Try Square
The Bench Hook
The stiffening rib is made to
Help the blade to bend
Prevent the blade from bending
Hold the saw together
The Tenon saw's blade is made of
Low quality cast steel, hardened and tempered
High quality cast steel, hardened and tempered
Hardened steel
When starting a saw cut, you should
Never use the saw
Pull the blade back a few times
Push the blade forward
This tool is used for
Checking lines
Marking lines at right angles only
Marking lines at right angles only and testing corners
The tool shown below is called
The Tenon Saw
The Try Square
The Bench Hook
The tool shown below is called
The Tenon Saw
The Try Square
The Bench Hook
The tool shown below is called
The Tenon Saw
The Try Square
The Hand File
The index finger is used to
Guide the saw cut
Hold the blade on to the handle
Hold the handle in place
This tool has 3 parts. The part not labeled is called the...
Bed
Blade
Handle
"Wood grain" is the direction, texture and....
pattern of the fibres that make up a piece of wood
Parts that make up a piece of wood
Parts that make up a tree
We must always cut...
With the grain
Across the grain
Close to the grain
When using this tool, the left hand is used to
Hold the material firmly
Guide the saw cut
Make sure the table is not cut
The tool shown is used to
Improve accuracy and safety
Improve clamping
Mark lines
The tool shown below is used for
Measuring
Cutting
Accuracy
At what angle is the blade set in the stock at?
90 degrees
100 degrees
120 degrees
The person is using the tool below to
Draw a line at a right angle
Draw a line at any angle
Cut the material
