NEW
Font size
WorksheetsSAMTK Day 2
Total questions: 15
Worksheet time: 8mins
Which of the following fluids is used as the heat-carrying medium in the cooling systems of Honda vehicles?
Engine oil (or other oil with similar properties)
Brake fluid (or other fluid with similar properties)
Demineralized water
Water with anti-freeze and anti-rust additives
Describes the function of a radiator cap?
Valves inside the radiator cap regulate the pressure in the cooling system.
A filter inside the radiator cap prevents rust and other foreign substances in the coolant from entering the radiator core.
The radiator cap is triple-sealed to keep the cooling system completely airtight.
A temperature sensor in the radiator cap sends coolant temperature signals to the PGM-FI unit.
What are 2 basic properties of why coolant is used?
I) High boiling point
II) Low boiling point
III) High viscosity
IV) Anti-corrosion
I & II
II & III
III & IV
I & IV
Which of the following statements correctly describes the flow of coolant immediately after a cold engine is started?
The coolant circulates through the radiator and cylinder block
Until the engine warms up, the coolant circulates through the
water jacket but does not flow into the radiator
No coolant circulation takes place until the engine has warmed up
The coolant is circulated only through the radiator
Which one of the following statements is correct with regard to replacing coolant?
Coolant should be replaced when its volume had decreased by a certain amount
Coolant can be used until it gets dirty
Coolant should be replaced at regular intervals
There is no particular need to replace coolant
Responsible for converting the rotation of the steering wheel into lateral motion?
The steering wheel
The steering shaft
The steering gearbox
The tie-rod
Which one of following steering systems do Honda vehicles use?
Rack and pinion type
Ball and nut type
Worm and sector type
Leading and trailing type
Power Steering System is designed for:
Effort to turn the steering wheel can be reduced when driving at low speed and parking
Effort to turn the steering wheel can be increased when driving at high speed
Effort to turn the steering wheel can be reduced when driving at high speed
Effort to turn the steering wheel can be increased when driving at low speed and parking
One of the suspension’s basic functions is to absorb vibration and impact forces from the road surface. What is the other one?
To ensure the wheels are always firmly in contact with the road surface
To ensure that the steering wheel can deliver a suitable amount of steering force
To ensure that wheel alignment is not disturbed during driving
To automatically correct effects of over-steering.
In what case is the use of rigid suspension beneficial?
When it is desired to reduce the unsprung mass.
When it is desired to improve tire-to-ground contact characteristics.
When it is desired to have more flexibility in design.
When large changes in load make it necessary to have a large suspension stroke.
Which symptom is incorrect about if the replacement of CVT Fluid is not performed?
Poor acceleration
Increase in gear shock
Increase in torque
Poor gear change
CVT Fluid is design to;
Prevent wear of the Steel Belt and between the pulleys.
Make the engine temperature cooler
Prevent vibration of the engine
Prolong the life of the battery
Which will be the incorrect symptom if the ATF is not replaced on schedule?
Increase gear shock
Engine overheating
Poor acceleration
Poor gear changes
ATF functioned as a lubricant inside the Gear Unit, therefore characteristic of the ATF should be;
High Boiling Point and High Viscosity
Low Boiling Point and Low Viscosity
Low Boiling Point and High Viscosity
High Boiling Point and Low Viscosity
What does VTEC mean?
Valve Timing and Electronic Engine Control
Variable Timing and Electronic Control
Variable Valve Timing and Lift Electronic Control
Variable Valve Timing and Engine Control
