Font size
WorksheetsFinal Exam
Total questions: 55
Worksheet time: 53mins
What do you call the part of the table saw which is used for ripping lumber. (long silver bar)
Saw cut
fence
miter gauge
chop saw
What do you call the type of cut made with a table saw which cuts lumber parallel with the grain?
Miter cut
Rip cut
angle cut
cross cut
What do you call the type of cut made on the table saw which is perpendicular to the grain?
rip cut
cross cut
cutter cross
re saw cut
When sanding a project would you sand with the grain or against the grain?
With the grain
Against the grain
Cross grain
What is the name of the shop equipment pictured below?
Hack saw
Compound miter saw
Table saw
Band saw
What is the name of the machine pictured below?
Chop saw
Band saw
Table saw
Hand saw
What is the name of the shop equipment shown below?
Band saw
Drill press
hack saw
Chop saw
T or F - The higher the number of a piece of sandpaper the smoother the sandpaper grit?
True
False
What is the name of this piece of shop equipment?
Band saw
Table saw
Hack saw
Miter saw
What type of cuts are made to construct the four corners of a picture frame?
Rip cuts
miter cuts
cross cuts
cross cuts
Select the wood which is classified as a soft wood?
Pine
Oak
Maple
Walnut
Safety goggles, safety glasses or a face shield are required when performing any operation which may endanger your eyes.
True
False
Name the hand tool which is pictured below.
torpedo level
try square
combination square
speed square
What is the name of the tool which is pictured below?
torpedo level
carpenter square
combination square
speed square
what is the main function of a torpedo level?
used to check if a surface is vertically plumb or horizontally level.
used to measure short distance.
used to lay out stairs.
used to make sure something sturdy.
Which of the following hand tool is the coping saw?
What is the name of this hand tool?
Try plane
Block plane
Jack plane
Smoothing plane
Identify measurement "C" on the scale provided. (run your cursor over the scale to enlarge the image)
7/8"
7/16"
5/16"
3/8"
Identify measurement "M" on the scale provided. (run your cursor over the scale to enlarge the image)
1 -1/16
1 - 3/8"
1 - 3/16"
1 -3/4"
Identify measurement "U" on the scale provided. (run your cursor over the scale to enlarge the image)
1- 3/16"
1- 13/16
1- 3/8"
1- 3/4"
Identify measurement "H" on the scale provided. (run your cursor over the scale to enlarge the image)
1-1/4"
15- 1/16"
13/16"
1- 1/8"
What does PPE stand for?_____________________
Professional Protective Equipment
Proactive Protective Equipment
Personal Protective Equipment
Personal Prevention Equipment
How many sixteenth inch readings are there in the one sixteenth inch scale?
8
16
32
1
Which piece of shop equipment has a short metal blade and is used to cut small intricate curved or irregular shapes?
Table Saw
Miter Saw
Band Saw
Scroll Saw
An electrical fire is considered a ______ __ fire.
Class A
Class B
Class C
Class D
A gasoline or flammable liquid fire is considered a _____ __.
Class A
Class B
Class C
Class D
A fire that consumes ordinary combustibles such as lumber, cloth, paper, and some plastics is considered a _____ __ fire.
Class A
Class B
Class C
Class D
A fire that consumes metals such as lithium, magnesium titanium etc.... is considered a _____ __ fire.
Class A
Class B
Class C
Class D
Which two machines in the shop have variable speed controls?
bandsaw and table saw
wood lathe and band saw
scroll saw and wood lathe
mortise machine and compound miter saw
On which machine would you find a tensioning lever?
routing table
wood lathe
scroll saw
mortise machine
How many eighth inch readings are there in the one eighth inch scale?
8
4
32
1
Identify measurement "X" on the scale provided. (run your cursor over the scale to enlarge the image)
1 -13/16
1 - 3/8"
1 - 15/16"
1 -3/4"
Identify measurement "R" on the scale provided. (run your cursor over the scale to enlarge the image)
1 -13/16
1 - 3/8"
1 - 9/16"
1 -3/4"
What does MDF sheathing stand for?
manufactured during fabrication
multi durable flooring
medium density fiber board
none of the above
What does OSB stand for?
outstanding structural board
suitable for outdoors
ordinary siding board
oriented stranded board
What type of wood joint is commonly used for shelving and is cut using the dado cutters on a table saw?
rabbet joint
finger joint
dado joint
miter joint
What type of joint forms a 90 degree angle and is used for picture frames?
rabbet joint
biscuit joint
dado joint
miter joint
What is the name of the wood joint shown below?
rabbet joint
biscuit joint
dado joint
miter joint
What is the name of the wood joint shown below?
rabbet joint
biscuit joint
dado joint
mortise and tenon
What is the name of the tool pictured on the left?
bar clamp
C-clamp
wire framing clamp
wooden spindle clamp
What does margin of safety mean?
the safety zones marked in yellow around a machine.
the amount of space required to safely work on a machine.
the minimum distance you should keep your fingers away from the blade.
the shortest distance you should stand between you and the machine.
Crosscutting stock normally requires the use of a __________________.
Fence
Push Stick
Stop Block
Miter Gauge or Cross cut sled
When is it safe to perform freehand cuts on the table saw? (No fence, no miter gauge)
When cutting irregular shaped patterns.
When cutting very thin stock
Never
When cutting plywood
Which of the following operations require the use of a push stick when cutting on the table saw?
Ripping narrow lumber
Crosscutting lumber
when cutting miters
when cutting Dado joints
Calculate the cost of 4 pieces of hardwood five quarters x 8 inches wide x 68" long at a cost of $2.65 per board foot.
$5.06
$8.35
$50.06
$12.51
Calculate the cost of 5 pieces of oak 3 quarters thick x 6 inches wide x 42" long at a cost of $1.68 per board foot.
$13.45
$8.35
$16.03
$11.03
What is the name of this hand tool?
Single cut file
Double cut file
course rasp
fine rasp
What is the name of this hand tool?
single cut file
fine rasp
coarse rasp
double cut file
What type of wood joint is this?
combination dado rabbet joint
dove tail joint
cross lap joint
end lap joint
Which three (3) of the following can a doctologist learn from studying the annual rings of a tree?
Age of the tree.
How many branches per linear foot the tree contained.
Drought conditions over a period of time.
The amount of cell growth of the tree during each growing season.
Which of the following terms defines the group of evergreen trees which produce cones and pine needles.
Douglas fur
Conifer
Deciduous
Which of the following terms describes flaws in lumber that mar the appearance and affect the value of the lumber.
Blemish
Stud
Trimmer
Top plate
Which of the following two (2) terms describe the operation of converting logs into lumber through a sawing process.
Cross cutting
Quarter sawing
Clear cutting
Plain sawing
Which term describes the notch created by the saw blade and or the amount of lumber removed by the thickness of a blade when cutting lumber?
rip cut
cross cut
kerf
Plain sawing
Which term is used to define hard wood lumber derived from trees that loose their leaves seasonally and is sold by the board foot?
oak
conifer
deciduous
Plain sawing
