NEW
Font size
WorksheetsAELE Quiz - May 24 - 26, 2021
Total questions: 50
Worksheet time: 49mins
The unintercepted portion of rainfall that falls onto the ground surface is called:
interflow
infiltration
surface runoff
throughfall
The lateral movement of percolating water when it encounters an impervious layer is called:
seepage
baseflow
interflow
surface runoff
The type of precipitation that occurs when air masses converge into low pressure area is called:
convective
orographic
cyclonic
frontal precipitation
Volume of water released from storage in an unconfined aquifer per unit horizontal area per unit decline in water table.
specific storage
specific retention
specific yield
transmissivity
When the rainfall intensity is lower than the infiltration capacity, the actual rate of infiltration is equal to:
infiltration capacity
saturated hydraulic conductivity
rainfall intensity
rainfall mass
What is the recommended ceiling height for housing for swine production?
3.0 m
2.2 m
2.0 m
2.4 m
What is the recommended width for housing for broiler production?
10-11m
10-12m
11-12m
9-11m
What is the recommended space requirement per 100 birds for layers on slotted floors?
17mm2
9mm2
14mm2
7mm2
What is the recommended space requirement for pregnant doe/ewe that is over 70kg?
2.0m2
2.3m2
1.3m2
1.6m2
What is the minimum space requirement for feeding in a cattle feedlot?
850mm/animal
750mm/animal
650mm/animal
550mm/animal
What is the space requirement per animal for the holding pen of cattle that is 270 - 540 kg?
1.3 m2
1.6 m2
3 m2
4 m2
What is the minimum space requirement per animal in a crowding pen for cattle over 540 kg?
1.1 m2
3 m2
1.9 m2
1.6 m2
What is the minimum width of the gutter for the drainage of a housing for dairy cattle?
480 mnm
460 mm
440 mm
450 mm
What is the minimum space requirement per animal in a carabao feedlot?
5 m2
4 m2
3 m2
6 m2
What is the minimum width of the doors in a milking parlor?
1.2 m
1.5 m
2.0 m
2.4 m
What is the lighting requirement withing the lairage for swine, small and large animals?
200 lux
110 lux
540 lux
240 lux
What is the temperature requirement for the boiler room of a slaughterhouse for swine, small and large animals?
90°C
80°C
70°C
60°C
What is the minimum distance from the carcass suspension contact point to the floor for calves in a slaughterhouse for swine, small and large animals?
3.7m
2.7m
2.4m
2.6m
What is the lighting requirement for the holding/wash area in a poultry dressing plant?
100 lumen/m2
200 lux
500 lumen/m2
300 lux
What is the requirement for the doorway of a farm workshop and machinery shed?
3 m high and 3.7 m wide
3.7m high and 3 m wide
2.4 m high and 3 m wide
3 m high and 2.4 m wide
What is the width requirement for a two-lane road carriageway of farm to market roads?
4 m
2 m
2.4 m
4.2 m
What is the width requirement for a roadway of farm to market roads?
4 m including shoulders
4 m not including shoulders
2 m including shoulders
2 m not including shoulders
What is the maximum recommended embankment height from the original ground for a roadway on main irrigation canals of farm to market roads?
20 cm
30 cm
50 cm
40 cm
What is the recommended radius of curvature for flat terrain of farm to market roads?
500 m
150 m
50 m
25 m
What is the recommended longitudinal slope for mountainous terrain of farm to market roads?
12%
10%
2%
20%
What is the recommended thickness for a trapezoidal ditch of farm to market roads?
0.25 m
0.20 m
0.15 m
0.10 m
What is the recommended backslope for a triangular ditch of farm to market roads?
1:2
2:1
1.5:1
1:1.5
What is defined as the analysis and evaluation of the monetary consequences by using the theories and principles of economics to engineering applications, designs and projects?
Economic analysis
Engineering cost analysis
Engineering economy
Design cost analysis
What is considered as the standard unit which forms the basis of a country’s domestic money supply?
Monetary unit
Currency
Foreign exchange
Cash or check
What are the two classifications of goods and services?
Local and imported
Raw and finished
Consumer and producer
Ready-made and made-to-order
What is considered as the basic consuming or demanding unit of a commodity?
Seller
Manufacturer
Producer
Buyer or Consumer
What is a market situation whereby there is only one buyer of an item for which there is no goods substitute?
Monopsony
Monopoly
Oligopoly
Oligopsony
Duopoly is a market situation where there is/are:
Few sellers and few buyers
Few sellers and many buyers
Many sellers and few buyers
One seller and few buyers
“When one of the factors of production is fixed in quantity or is difficult to increase, increasing the other factors of production will result in a less than proportionate increase in output”. This statement is known as the:
Law of diminishing return
Law of supply
Law of demand
Law of supply and demand
What is defined as the interest on a load or principal that is based only on the original amount of the loan or principal?
Effective rate of interest
Nominal rate of interest
Compound interest
Simple interest
Under ordinary simple interest, how many days in one year?
300
360
365
366
A uniform series of payment occurring at equal interval of time is called ______.
Annuity
Amortization
Depreciation
Bond
What is the type of annuity where the payments are made at the end of each period starting from the first period?
Ordinary annuity
Perpetuity
Annuity due
Deferred annuity
Which is NOT an essential element of an ordinary annuity?
The amounts of all payments are equal
The payments are made at equal interval of time
The first payment is made at the beginning of the first period
Compound interest is paid on all amounts in the annuity
In what method of computing depreciation where it assumes that the annual cost of depreciation is a fixed percentage of the book value at the beginning of the year?
Straight line method
Sinking fund method
Sum-of-year digit method
Declining balance method
How many years will P100,000 earn a compound interest of P50,000 if the interest rate is 9% compounded quarterly?
3.25
5.86
4.55
2.11
An engineer bought an equipment for P500,000. Other expenses including installations amounted to P30,000. At the end of its estimated useful life of 10 years, the salvage value will be 10% of the first cost. Using straight line method of depreciation, what is the book value after 5 years?
P 291 500
P 242 241
P 282 242
P 214 242
The first cost of a machine is P1,800,000 with a salvage value of P300,000 at the end of its life of 5 years. Determine the total depreciation after 3 years using sum of years digit method.
P 1 150 000
P 1 300 000
P 1 200 000
P 1 350 000
A machine costing P720,000 is estimated to have a life of 10 years. If the annual rate of depreciation is 25%, determine the total depreciation using a constant percentage of the declining balance method.
P 679 454.27
P 532 825.73
P 432 725.45
P 764 243.33
A certain office equipment has a first cost of P20,000 and has a salvage value of P1,000 at the end of 10 years. Determine the depreciation at the end of the 6th year using Sinking fund method at 3% interest.
P 10 720
P 11 680
P 12 420
P 9 840
A 30 cm diameter well produces 200 L/min when the drawdown is 2 m. This well penetrates an aquifer 35 m thick. Find the flow from this well if its diameter is 20 cm. Assume the radius of influence of the cone of depression is 750 m.
298.07 m3/day
265.47 m3/day
274.91 m3/day
281.68 m3/day
The recent monsoon rains have posted a nearly uniform rainfall intensity of 30mm/hr over a 1500 ha watershed area in Central Luzon. If the runoff coefficient is 0.15, what is the runoff in m3/sec?
667.2 cms
9.07 cms
18.9 cms
2.479 cms
A rectangular lined canal will be used to irrigate 60 has. If a Francis weir of 0.4 m crest will be used to control the flow, what would be the depth of water over the crest in order to supply 2 lps/ha?
37.65 cm
29.84 cm
18.9 cm
24.79 cm
Three tanks are installed side by side in a filed to measure the evapotranspiration of rice. Tank A is bottomless and is cropped. Tank B is bottomless but is uncropped. Tank C has a bottom and is uncropped. If the water losses after 3 rainless days are as follows:
Tank A – 20.0 mm
Tank B – 16.0 mm
Tank C – 10.0 mm
Determine the actual evapotranspiration of the crop.
3.67 mm/day
7.33 mm/day
4.67 mm/day
6.33 mm/day
The following infiltration capacity equation has been derived based on experimental data: 𝑓 = 8.1 + 4.1𝑒−12.9𝑡 where 𝑓 is in mm/hr and t is in hr. The cumulative infiltration in mm after 46 minutes is _____.
10.96 mm
6.53 mm
372.65 mm
13.09 mm
