WorksheetsBLT-112 SPECIAL FINAL X-2
Total questions: 34
Worksheet time: 17mins
Honeycomb in roof deck concreting resulted to:
Impervious material
Permeable material
Improper concrete proportion
Normal result
What type of window easy to clean:
Louver
Awning
Sliding
Casement
Finishing: Wood used for Cabinets
MDF
Gypsum Board
Lawanit
Bamboo
Locks used on main door
Single Lock
Double Lock
Bolt Lock
Hook & Eye
What kind of glass can redirect the suns reflection?
Tempered Glass
Plate Glass
Float Glass
Glass Block
Window type allowing greater wind entry into the room
Capiz
sliding
Casement
Fix
What kind of window wherein in the morning, exterior can be viewed and at night, reflection of yourself can be seen?
Reflective Glass
Float Glass
Plate Glass
Clear Glass
Lock use on Toilet & Bath (T&B) to allow openable outside when not in used or avoiding locked door after used
Double Lock
Lock Inside alone
Single Lock
Outside Lock
Glass use in commercial establishment (for public used)
Tempered Glass
Reflective Glass
Float Glass
Plate Glass
Why should you put primer on steel before painting?
For Adhesion
To prevent rust
Full seal
None at all
What type of roofing will be used in a heavy forested area?
Very steep with shingles on a space frame
Steep roof on metal frame
Reinforced Concrete Roof Deck
Polycarbonate Sheet
Used in kitchen countertops
Granite
Peebles
Vinyl
Rough Concrete
A building will be erected on a coastal area
Use protruding roof eaves
Provide big balcony
Use roof deck
Use Rib type metal coloroof
A building will be erected on a hilltop, what roofing system and materials will be used?
Use roof shingles
Protruding Eaves
Metal Roofing
Reinf. Concrete (RC) Roof Deck
Aside from screw and nuts, what material is also used in joining steel?
Acetylene Torch
Nail
Contact Cement
Cement Paste
If you are to renovate a glass building, what should be used in order to minimize the heat generated inside the building?
Use Tinted Glass
Use Concrete Hollow Block (CHB) all around the building
Use CHB and minimize Glass
Use shear wall all over
Kind of material imitated by PVC for Thermal and Moisture Protection
Wood
Concrete
Metal
Stone
Used for bonding ceramic tiles on walls and floors?
Contact Cement
Tile Adhesive
Grout
Lead
Where should you put the heat insulating material like Foam on the roof structure?
Just under the Roofing material
Just above the Roof Truss
On the Ceiling
Over the Roof material
Such work uses nozzle pressure of from 50 to 80 lbs. will be required to spray to attain concrete finishes on concrete wall
Sand-float Finish
Sand-Blast Finish
Exposed Aggregate Fin.
Steel Troweled Fin.
A type of tile finishes manufactured by pressing in molds with a mixture of cement and sand, surface color of the tile is achieved by the addition of mineral oxide colors
Cement Tile
Ceramic Tile
Granite Tile
Marble Tile
Main component of Paint opaque finish
Pigment
Flux
Fluid
Silica
Called Baldosa
Cement Tile
Ceramic Tile
Paving Cement
Granulitic Tile
Pigment and Vehicle is a mixture of
Transparent Paint Finish
Opaque Paint Finish
Oil Paint Finish
Varnish Finish
Not considered as paint vehicle function
Binder
Drier
Thinner
Sealer
Oil paint is applicable to what material?
Metal
Concrete
Stone
Glass
The liquid of an opaque type paint should not contain more than
__________ of the paint’s volume by weight
35%
50%
25%
60%
Used for painting concrete and masonry surfaces
Water base paint
Oil base Paint
Can be Both Water & Oil Base Paint
Best result of external painting could be attained if the pigment quantity shall be _____________ by weight
Not less than 50%
Not less than 65%
Not more that 65%
Not less than 35%
A type of wood floor finish using smaller strips of wood arranged to form a square size. This is also advantageous in the adoption of the government's Zero Waste Management
Parquet tile flooring
Plank flooring
Strip flooring
Engineered wood flooring
Identify the board foot of a 2”x2”x10’ (150)
650
600
6000
500
5000
Type of manufacturing tiles shaped in steel dies by applying heavy pressure to the damp ceramic mix while it is in finely pulverized form
Plastic Process
Dust-press Process
Kiln Dried Process
Molten Press Process
Compute for the Board Feet of 45pcs. 2"x4"x12
360
4320
540
none at all
Compute for the board feet of a wood post 4pcs- 4x4x16
21.33
256
85.33
64
