WorksheetsScroll saw and spindle sander quiz
Total questions: 12
Worksheet time: 6mins
"Never sand very ______ pieces with the spindle sander." Fill in the blank.
Big
Small
After turning on the sander when can you start sanding?
Right away
When it gets up to full speed
Very little speed at all
When its at medium speed
Before turning on the sander what do you need to make sure of?
Get materials ready
Make sure you have a pencil handy
Get your bench all clear and clean
Make sure there are no scraps between the spindle and the table
When you are finished with the spindle sander, make sure to clean the sander with an _______________ block
Steel
Copper
Abrasive (Rubber)
Plastic
How far away should your fingers stay from the sander?
5 inches
1 inch
10 inches
12 inches
This photo is what machine?
Drill Press
Spindle sander
Band saw
Scroll Saw
Check to be sure the blade is installed correctly on the scroll saw. The teeth should point _________.
upward
downward
to the left
to the right
Don't ____________________. Twisting the blade or putting too much pressure on it will break it.
adjust the tension
adjust the height
move the material
force the cut
Keep your fingers away from the area ________ of the blade. Keep your fingers, hands and arms at least ___________ away from the blade.
to the right; two inches
in back; one inch
in front; two inches
in back, two inches
What is the proper way to dress when operating the scroll saw?
remove jewelry
secure loose clothing
tie back long hair
All the above
Where should you place the hold down foot when cutting stock on the scroll saw?
lightly against the work piece
1/8" (3mm) above work piece
1/4" (6mm) above work piece
1/2" (12.5mm) above work piece
This photo is what machine?
Table saw
Spindle sander
Drill Press
Band saw
