WorksheetsFlight instruments and inspections review
Total questions: 15
Worksheet time: 8mins
The VSI above shows displays a vertical airspeed of what speed and direction?
6 ft/min climb
60 ft/min descent
600 ft/min climb
60 m/h descent
Airspeed indicators measure speed by displaying the difference between the dynamic air pressure and __________ air pressure.
Static
Moving
Stagnant
True
Pitot tubes are used to measure...
Dynamic air pressure
Static air pressure
Relative air pressure
Total air pressure
Altimeters must be set before takeoff using a knob located near the altimeter. If no setting is available for your location, the alimeter should be zeroed at what elevation?
Airport elevation
Sea level
Cruising atitude
1,000 ft
Based on the airspeed indicator above, what is the maximum safe airspeed the aircraft should be operating at in smooth air conditions?
208 kts
109 kts
165 kts
240 kts
The pitot static system uses __________ to display readings
Air pressure
A laser
Gyroscopes
A timer
According to the FAA the responsibility to inspect an aircraft system to ensure it is in safe operating condition rests with the
Owner of the Air
The FAA
Instructor
Pilot in command
A 100-hour inspection was due at 3302.5 hours. The 100-hour inspection was actually done at 3309.5 hours. When is the next 100-hour inspection due?
3312.5 hours.
3402.5 hours.
3395.5 hours.
3409.5 hours
Regarding the 6 main types of inspection, the 1st A in the acronym AVIATE stands for...
Annual
Altimeter
Altitude
Automatic
Regarding the 6 main types of inspection, the 2nd A in the acronym AVIATE stands for...
Annual
Altimeter
Altitude
Automatic
Regarding the 6 main types of inspection, the V in the acronym AVIATE stands for...
VOR inspection
Vertical Inspection
Visual Inspection
VFR inspection
Regarding the 6 main types of inspection, the I in the acronym AVIATE stands for...
100 hour inspection
Instructional inspection
Instrument inspections
1 hour inspection
Regarding the 6 main types of inspection, the T in the acronym AVIATE stands for...
Transponder inspection
Tacometer inspection
Tecnical inspection
Tail inspection
Regarding the 6 main types of inspection, the E in the acronym AVIATE stands for...
ELT inspection
Emergency inspection
Everything inspection
E
Magnetic and Gyroscopic instruments use __________ to display readings
a
b
