WorksheetsITN 04.04 UTP Cabling
Total questions: 18
Worksheet time: 11mins
Category 5 UTP cable supports data transmission rates of up to _________.
10 Mbps
100 Mbps
1 Gbps
10 Gbps
Category 5e UTP cable supports data transmission rates of up to _________.
10 Mbps
100 Mbps
1 Gbps
10 Gbps
Category 6 UTP cable supports data transmission rates up to
10 Mbps
100 Mbps
1 Gbps
10 Gbps
Category 7 UTP cable supports data transmission rates of up to _________.
1 Gbps
10 Gbps
40 Gbps
100 Gbps
Category 8 UTP cable supports data transmission rates of up to _________.
1 Gbps
10 Gbps
40 Gbps
100 Gbps
The figure illustrates an RJ-45 UTP __________.
plug
socket
mediator
compositor
The figure illustrates an RJ-45 _________.
plug
socket
oracle
tuple
With legacy network equipment, an Ethernet straight-through cable is commonly used to connect _______________.
a host to a switch
a switch to a router
a router to a router
a host to a host
a workstation serial port to a router console port
With legacy network equipment, an Ethernet crossover cable is commonly used to connect _______________.
a switch to a switch
a switch to a router
a router to a router
a host to a host
a workstation serial port to a router console port
With legacy network equipment, a rollover cable is commonly used to connect _______________.
a switch to a switch
a switch to a router
a router to a router
a host to a host
a workstation serial port to a router console port
What standards are used to terminate an Ethernet straight-through cable?
Both ends use the T568A standard.
Both ends use the T568B standard.
One end uses the T568A standard, and one end uses the T568B standard.
The cable ends are specified by a Cisco proprietary standard.
What standards are used to terminate an Ethernet crossover cable?
Both ends use the T568A standard.
Both ends use the T568B standard.
One end uses the T568A standard, and one end uses the T568B standard.
The cable ends are specified by a Cisco proprietary standard.
What standards are used to terminate an Ethernet rollover cable?
Both ends use the T568A standard.
Both ends use the T568B standard.
One end uses the T568A standard, and one end uses the T568B standard.
The cable ends are specified by a Cisco proprietary standard.
What is the correct order of the odd-numbered pinouts for the T568A standard?
What is the correct order of the odd-numbered pinouts for the T568B standard?
What is the correct order of pins 1, 2, 3, and 6 in the T568A standard?
White-Green, Green, White-Orange, Orange
White-Orange, Orange, White-Green, Green
White-Brown, Brown, White-Orange, Orange
White-Blue, Blue, White-Green, Green
What is the correct order of pins 1, 2, 3, and 6 in the T568B standard?
White-Green, Green, White-Orange, Orange
White-Orange, Orange, White-Green, Green
White-Brown, Brown, White-Orange, Orange
White-Blue, Blue, White-Green, Green
When used in a networking medium, UTP cabling consists of __________ pairs of color-coded copper wires.
two
four
eight
sixteen
