Font size
WorksheetsHand Tools/ Files
Total questions: 10
Worksheet time: 8mins
Three of these categories are:
(1) Measuring and Marking Out Tool (2) Clamping Tools
(3) Filing Tools
(1) Filing Tools
(2) Gauges
(3) Cutting Tools
(1) Cutting Tools
(2) Impelling Tools
(3) Gauges
(1) Clamping Tools
(2) Measuring and Marking out Tools
(3) Sawing Tools
Files are made in sizes, shapes and ___________ to suit the work to be done.
Style
types of cut
form
methods of filing
The cut of a file refers to
how big or small the teeth are
the method of filing
the shape of the teeth
how deep the teeth of the file can cut
The part of the file which goes into the handle is called the
top
tang
tooth
tip
The two methods of filing are:
cross filing and draw filing
draw filing and diagonal filing
straight filing and cross filing
straight filing and diagonal filing
The work should be held:
As low as possible in the vice
As high as possible in the vice
In the middle of the work and vice
at the tip of the vice
The purpose of hoilding the file this way is to:
allow you to reach the work when filing
allow you to file more work at one time
reduce the vibration of the work when filing
reduce the vibration of the file when using it
One of the BEST ways to reduce pinning is to
wash the file often
tap the file on the desk
put a little oil on the file before starting
rub a little chalk on the file before starting
Finish the sentence. A flat surface of the metal being filed must be tested by using:
(a)
How many categories of cutting tools are there?
3
6
4
5
