wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

Philippine Electrical Code_Definitions_Part 1

Total questions: 25

Worksheet time: 24mins

Name
Class
Date
1.

The permanent joining of metallic parts to form an electrically conductive path which will assure electrical continuity and the capacity to conduct safely any current likely to be imposed.

a)

Bus

b)

Hoistway

c)

Bonding

d)

Wireway

2.

A device designed to open and close a circuit by nonautomatic means and to open the circuit automatically on a predetermined overcurrent without damage to itself when properly applied within its rating.

a)

Circuit breaker

b)

Switchboard

c)

Switchgear

d)

Fixture

3.

All circuit conductors between the service equipment, or the generator switchboard of an isolate plant, and the final branch-circuit overcurrent device.

a)

Wireway

b)

Feeder

c)

Service

d)

Busway

4.

Capable of being inadvertently touched or approached nearer than a safe by a person. It is applied to parts not suitably guarded, isolated, or insulated.

a)

Exposed

b)

Accessible

c)

In sight from

d)

Equipment

5.

The sum of the continuous ratings of the load consuming apparatus connected to the system or any part thereof.

a)

Maximum demand

b)

Continuous load

c)

Connected load

d)

Ampacity

6.

A load where the maximum current is expected to continue for three hours or more.

a)

Connected load

b)

Continuous load

c)

Maximum demand

d)

Appliance

7.

The unit of luminous flux. It is equal to the flux through a unit solid angle (steradian) from a uniform point source of one candle, or to the flux on a unit surface all points of which are at unit distance from a uniform point source of one candle.

a)

Candela

b)

Lux

c)

Illuminance

d)

Lumen

8.

Any shaft way, hatchway, well hole, or other vertical opening or space in which an elevator or dumbwaiter is designed to operate.

a)

Service lateral

b)

Raceway

c)

Hoistway

d)

Busway

9.

Capable of being removed or exposed without damaging the building structure or finish, or not permanently closed in by the structure or finish of the building.

a)

Concealed

b)

Fitting

c)

Accessible

d)

Exposed

10.

Utilization equipment, generally other than industrial, normally built in standardized sizes or types, which is installed or connected as a unit to perform one or more functions such as clothes washing, air conditioning, food mixing, deep frying, etc.

a)

Intermittent duty

b)

Load

c)

Equipment

d)

Appliance

11.

Capable of being reached quickly for operation, renewal, or inspections, without requiring those to whom ready access is requisite to climb over or remove obstacles or to resort to portable ladders, chairs, etc.

a)

Readily Accessible

b)

Exposed

c)

In sight from

d)

Switchboard

12.

The circuit conductors between the final overcurrent device protecting the circuit and the outlet(s).

a)

Feeder

b)

Branch circuit

c)

Busway

d)

Grounded circuit

13.

So constructed that dust will not enter the enclosing case under specified test conditions.

a)

Dustproof

b)

Dusttight

c)

Drip-proof

d)

Concealed

14.

So constructed or protected that dust will not interfere with its successful operation.

a)

Concealed

b)

Dusttight

c)

Drip-proof

d)

Dustproof

15.

One or more rooms for the use of one or more persons as a housekeeping unit with space for eating, living and sleeping and permanent provisions for cooking and sanitation.

a)

Service

b)

Hoistway

c)

Garage

d)

Dwelling unit

16.

A disruptive discharge around or over the surface of a solid or liquid insulator.

a)

Flashover

b)

Surge

c)

Overcurrent

d)

Overload

17.

The highest current at rated voltage that an over current protective device intended to interrupt under standard test conditions.

a)

Nominal voltage

b)

Maximum demand

c)

Interrupting rating

d)

Overcurrent

18.

_____ is the largest of all the demands which have occurred during the specified period of time.

a)

Ampacity

b)

Peak load

c)

Demand factor

d)

Maximum demand

19.

Approved steel or metal troughing (usually with removable cover), and fitting therefore, so formed and constructed that insulated conductors may be readily drawn in and withdrawn, or laid in and removed, without injury either to conductor or covering.

a)

Busway

b)

Wireway

c)

Raceway

d)

Lateral conductor

20.

A general term covering an assembly or assemblies of devices for the interruption, control, metering of electric power.

a)

Switchgear

b)

Switchboard

c)

Circuit breaker

d)

Service equipment

21.

A large single panel, frame, or assembly of panels on which are mounted, on the face or back or both, switches, overcurrent and other protective devices, buses, and usually instruments.

a)

Switchgear

b)

Panel board

c)

Switchboard

d)

Service equipment

22.

A sudden upward transient variation in the current, potential or power.

a)

Overcurrent

b)

Surge

c)

Short circuit

d)

Flashover

23.

The _____ of a circuit of a system or circuit is a nominal value assigned to a system of a circuit of a given voltage class for the purpose of convenient designation.

a)

maximum demand

b)

connected load

c)

nominal voltage

d)

demand factor

24.

The conductors and equipment for delivering energy from the electricity supply system to the wiring system of that premises served.

a)

Service lateral

b)

Service

c)

Service drop

d)

Service equipment

25.

A conductor, a group of conductors, in switchgear assemblies which serves as a common connection for two or more circuits.

a)

Lateral conductor

b)

Branch circuit

c)

Feeder

d)

Bus